.:HSTuners::

02-22-2002, 11:04 AM

Hey again, guys

Thanks for the info on doing I/H/E for my 93 accord's F22A, which I plan to do, but frankly I'd like a little more power

. Does anyone make turbo or at the very least superchargers for my engine? So far all I can find is for Civic's. Any links would be appreciated.

I was also wondering if maybe an H22 would be worth the money. Any ideas of cost and pro's/con's?

Thanks again.

ebpda9 · 02-22-2002, 11:21 AM

turbo on an f22 ? i think the engine is too weak for it, and there won't be too much power gains from it since the engine makes a blazing 125hp. the most you can boost will be a 8.5 psi, without a rebuid. the h22 is the better way to go and then the turbo.

as far as i know f-max makes a turbo kit for our cars thou but it's extremely overpiced like 4g or so.

02-22-2002, 12:56 PM

Thanks for the info. Any ideas on what the cost of an h22 would be and where I could go about getting one? Should I do that before getting I/H/E? Is the h22 vtec or can I get vtec for it?

Accord Man · 02-22-2002, 01:24 PM

Hey!

The cheapest way to get an h22, would probably be thru a specialy website.. Such as jdm1.com... If you do a search on this board, you'll find some other sites.. Install should be somewhere around 700$.

Its a vtec engine. Redline is at 7200 rpm (So that you dont burn too much gas!!

*inside joke*)..

If you're planning on doing a swap, dont waste any money on any bolt-ons.. Cause even if you do, once you get the engine, certain parts wont fit.

ebpda9 · 02-22-2002, 03:29 PM

Quote:

Originally posted by MacRulzMan
Thanks for the info. Any ideas on what the cost of an h22 would be and where I could go about getting one? Should I do that before getting I/H/E? Is the h22 vtec or can I get vtec for it?

like accord man said www.jdm1.com will have a h22 for 2300 (complete swap: engine, tranny, ecu and harness). none of the bolt ons will fit so save ur money, get the swap and then mod the engine.

94_AcCoRd_EX · 02-22-2002, 04:31 PM

Quote:

Originally posted by Accord Man

If you're planning on doing a swap, dont waste any money on any bolt-ons.. Cause even if you do, once you get the engine, certain parts wont fit.

Exactly... I think the AEM CAI will still fit though, so that might be a good first mod.

Accord Man · 02-22-2002, 04:53 PM

Quote:

Originally posted by hondaman-iac

like accord man said www.jdm1.com will have a h22 for 2300 (complete swap: engine, tranny, ecu and harness). none of the bolt ons will fit so save ur money, get the swap and then mod the engine.

2300$ CAD, right?? Cause when you posted a link earlier.. I checked and there was a 514 area code number.. Thats montreal.

ebpda9 · 02-23-2002, 01:16 AM

Quote:

Originally posted by Accord Man

2300$ CAD, right?? Cause when you posted a link earlier.. I checked and there was a 514 area code number.. Thats montreal.

well u live in mtl so give em a call and find out. if it's 2300 cad then i'll get one.( that will be like 1500 us ?)

02-22-2002, 11:04 AM	#1
MacRulzMan Posts: n/a	Turbo/Super for 93 Accord? Hey again, guys Thanks for the info on doing I/H/E for my 93 accord's F22A, which I plan to do, but frankly I'd like a little more power . Does anyone make turbo or at the very least superchargers for my engine? So far all I can find is for Civic's. Any links would be appreciated. I was also wondering if maybe an H22 would be worth the money. Any ideas of cost and pro's/con's? Thanks again.

02-22-2002, 11:21 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	turbo on an f22 ? i think the engine is too weak for it, and there won't be too much power gains from it since the engine makes a blazing 125hp. the most you can boost will be a 8.5 psi, without a rebuid. the h22 is the better way to go and then the turbo. as far as i know f-max makes a turbo kit for our cars thou but it's extremely overpiced like 4g or so. __________________

02-22-2002, 01:24 PM	#4
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 43 Posts: 5,698	Hey! The cheapest way to get an h22, would probably be thru a specialy website.. Such as jdm1.com... If you do a search on this board, you'll find some other sites.. Install should be somewhere around 700$. Its a vtec engine. Redline is at 7200 rpm (So that you dont burn too much gas!! inside joke).. If you're planning on doing a swap, dont waste any money on any bolt-ons.. Cause even if you do, once you get the engine, certain parts wont fit. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-22-2002, 12:56 PM	#3
MacRulzMan Posts: n/a	Thanks for the info. Any ideas on what the cost of an h22 would be and where I could go about getting one? Should I do that before getting I/H/E? Is the h22 vtec or can I get vtec for it?