.:HSTuners::

VR4_Craver · 04-01-2004, 04:56 PM

I havent got the slightest clue how to do these. Should i just drop 50 bucks and have it done right??

VR4_Craver · 04-03-2004, 10:14 PM

DAMN IT SOMEONE ANSWER!!!!!

thermal · 04-04-2004, 01:42 AM

Dude, there should only be 2 wires on any lighting:
1) mount the light anywhere you want to
2) ground it (black wire)
3) power wire to the positive side of the battery.

I recomment to use at least a 10 gauge wire. Once you run a wire on one lighting, you can tap the rest to it unless you want a separate switch for each individual light........... very simple.

JDMFantasy2k · 04-04-2004, 09:49 AM

A kit like that doesn't come with directions? well even if it doesn't i'm sure it's similar to my neons in my footwells (aside from the fact that you kit may have transformers or relays). Anyhow pretty much figure out which wire is which, run a wire from you batttery with an inline fuse (very important) and before you install anything make sure you don't have a fuse in it (hence no power and nothing can get damaged). then find a suffficient ground, make sure they're mounted and wire it all into a switch in the car. then insert the fuse. good luck

04-01-2004, 04:56 PM	#1
VR4_Craver Banned Join Date: Sep 2002 Location: The stixx Age: 38 Posts: 1,550	Underbody lights.... I havent got the slightest clue how to do these. Should i just drop 50 bucks and have it done right?? __________________ me from another forum (im the top geekz0r) the geekz0r (11:03:46 PM): basicly, look at it this way...the 6speed is the same is the 5speed in 2,3,4,5,and 6...only the speeds are different because of the fd the geekz0r (11:04:16 PM): so 2nd pulls like 1st in the 5speed, 3rd is like 2nd, etc. PortugeeTex (11:04:26 PM): so whats 1st like then? the geekz0r (11:04:49 PM): 1st is like hitting a cheeta in the ass with a tazer PortugeeTex (11:04:53 PM): lmfao

04-03-2004, 10:14 PM	#2
VR4_Craver Banned Join Date: Sep 2002 Location: The stixx Age: 38 Posts: 1,550	DAMN IT SOMEONE ANSWER!!!!! __________________ me from another forum (im the top geekz0r) the geekz0r (11:03:46 PM): basicly, look at it this way...the 6speed is the same is the 5speed in 2,3,4,5,and 6...only the speeds are different because of the fd the geekz0r (11:04:16 PM): so 2nd pulls like 1st in the 5speed, 3rd is like 2nd, etc. PortugeeTex (11:04:26 PM): so whats 1st like then? the geekz0r (11:04:49 PM): 1st is like hitting a cheeta in the ass with a tazer PortugeeTex (11:04:53 PM): lmfao

04-04-2004, 01:42 AM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Dude, there should only be 2 wires on any lighting: 1) mount the light anywhere you want to 2) ground it (black wire) 3) power wire to the positive side of the battery. I recomment to use at least a 10 gauge wire. Once you run a wire on one lighting, you can tap the rest to it unless you want a separate switch for each individual light........... very simple. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-04-2004, 09:49 AM	#4
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	A kit like that doesn't come with directions? well even if it doesn't i'm sure it's similar to my neons in my footwells (aside from the fact that you kit may have transformers or relays). Anyhow pretty much figure out which wire is which, run a wire from you batttery with an inline fuse (very important) and before you install anything make sure you don't have a fuse in it (hence no power and nothing can get damaged). then find a suffficient ground, make sure they're mounted and wire it all into a switch in the car. then insert the fuse. good luck