.:HSTuners::

*pdiggitydogg* · 07-21-2002, 02:55 PM

Yeah you gotta put power, and back-up, along with that entire set of wires from the green connector that WAS connected to the stock unit back to the radio. I put mine under the seat which meant a ton of wire and lengthening and soldering but its out of the way and my keyless works. (I just did this recently). You can get a "Y" connector for your stereo that will power the new unit and the stock. Try Crutchfield.com , you can probably get one there for like $5.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-21-2002, 02:55 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Yeah you gotta put power, and back-up, along with that entire set of wires from the green connector that WAS connected to the stock unit back to the radio. I put mine under the seat which meant a ton of wire and lengthening and soldering but its out of the way and my keyless works. (I just did this recently). You can get a "Y" connector for your stereo that will power the new unit and the stock. Try Crutchfield.com , you can probably get one there for like $5.