.:HSTuners::

05-29-2002, 09:50 PM

ill try to help you. first you have to remove the stock air intake. the box is held on by 4 screws at the bottom, the tube is connected to the throttle body with hose clamps (im tellin this try to remember what a 96 engine bay looks like) once all that is removed, connect the two hoses of the intake tube to where they should go based on the stock tubing. then put the filter on clamp it on and you reset the ecu. send me a pic of the engine bay and i can give you better instructions

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-29-2002, 09:50 PM	#1
90civiclxryder Posts: n/a	ill try to help you. first you have to remove the stock air intake. the box is held on by 4 screws at the bottom, the tube is connected to the throttle body with hose clamps (im tellin this try to remember what a 96 engine bay looks like) once all that is removed, connect the two hoses of the intake tube to where they should go based on the stock tubing. then put the filter on clamp it on and you reset the ecu. send me a pic of the engine bay and i can give you better instructions