...and the rebuild commences...

[thermal]

Here we go. I finally had a little bit of time to fuk with the suspension and braking today. I bought me a 12 ton hydraulic press to replace the front hub bearings and ball joints. I installed the extended wheel studs as well. I had some problems dealing with the hub bearings. Both of them bitches only came off with one side. The other half of the bearing inner housing remained on the hub. So I had to run to the nearest AutoZone to get a bearing puller. After an hour of improvision and patience, I finally got it off. The Hydraulic press was awesome. It surely made things so much easier. I'll post pics wednesday. I should putting the suspension and brake system back on. This wekkend will be some wiring and quite possible start the car.... if I ever get my Hondata base map..........