.:HSTuners::

thermal · 06-06-2005, 06:34 PM

So let me get this straight, I know that the Y8 IAT sensor is a plug type which is held by a grommet on the intake pipe.

The LS IAT sensor should have 2 screws for mounting and is mounted directly on the IM.

It will work either/or. But bro, let me look around to see if I can get you one. I might have some laying around....

So are you saying if you can use the Y8 IAT sensor and grommet mount it onto the intake pipe?

06-06-2005, 06:34 PM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	So let me get this straight, I know that the Y8 IAT sensor is a plug type which is held by a grommet on the intake pipe. The LS IAT sensor should have 2 screws for mounting and is mounted directly on the IM. It will work either/or. But bro, let me look around to see if I can get you one. I might have some laying around.... So are you saying if you can use the Y8 IAT sensor and grommet mount it onto the intake pipe? __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode