.:HSTuners::

*pdiggitydogg* · 04-14-2005, 01:53 PM

LS block
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

What should I do with it until I can get a head...and tranny....and all that other fun stuff?
How can I clean it up easily? (dont say hot tank) Those tops look pretty damn dirty...

Ive always wondered if engines can just sit there like that, and for how long.

thermal · 04-14-2005, 02:06 PM

The top of the pistons can really get that dirty... that's normal believe it or not. Use a few cans of brake cleaner and greenie-weenie (green pads). Lots of time will require for that thing to become emaculate. The block (outside) just needs to ge soaked with simple green then wash it off with hot water. If you have a steam cleaner, that will work better.

It just really depends on what the owner did while it was sittin like that. If he kept it lubricated and turn the crank at least once every week, then it should be fine. I sold a 96 d-series that sat untouched for 6 months. Now the person who bought it did a compression test and still pulled 140-160 across.

*pdiggitydogg* · 04-14-2005, 02:36 PM

I dont really care about the outside...it'll get dirty anyway and I tend not to care.
Im waiting to hear back from the seller to see if he's rotated it at all. It being a 94 I am mildly concerned about siezed parts

thermal · 04-14-2005, 08:34 PM

I hear you.....

*pdiggitydogg* · 04-14-2005, 09:04 PM

Yay good news
He says that he rotates it weekly and oils the cylinders.
I hope to be making the drive to get it first week of may.
Ive decided that worst case senario I have to replace the rings, but that could be fun

GT40FIED · 04-14-2005, 09:19 PM

Actually the worst case scenario is that he's lying through his teeth...but it doesn't seem like that's something you'd lie about (seeing as how it'd be immediately obvious if he was). Hell...for $100 the block itself (without reciprocating assembly) wouldn't be a bad deal. Then again...like I know what bare Honda blocks sell for.

*pdiggitydogg* · 04-14-2005, 09:29 PM

Right, I figured Id rotate it all when I showed up to pick it up, inspect it all, make sure its kosher.
Things can be had cheaper, I know that, but Im tired of trying to find them. This is within driving distance for me too.

JDMFantasy2k · 04-14-2005, 09:46 PM

are you going to boost on stock internals or totally build the block?

*pdiggitydogg* · 04-14-2005, 09:50 PM

Originally planned on stock, but if I get this, I dont see any reason not to at least get rods now that I think about it

MissJDM · 04-16-2005, 12:50 AM

Didn't we have an old email convo about you giong gsr-vtec?

I envy that guy, it's such a bitch to have to package a block to send.

*pdiggitydogg* · 04-16-2005, 08:46 AM

No, not that I can remember anyway. I know I PM'd you to make a ls/vtec write-up though.

I think Im getting ahead of myself on this one. Ive started looking at different parts for it already and I havent even put in my bid

*ChrisCantSkate* · 04-16-2005, 10:19 AM

hmm... whats an h22 bare block worth?

MissJDM · 04-16-2005, 11:03 AM

don't place a bid until the last minute.

and PAT, I could've sworn you told me you wanted gsr-t, so just to show you how awesome and correct I am, I found and fowarded you the PM.

On a side note, I was tempted to start the write up but never knew where to start as I had already post a few here and there. I just figred I'll make one thread when it's all said and done.

*pdiggitydogg* · 04-16-2005, 11:18 AM

Quote:

Originally posted by MissJDM
Didn't we have an old email convo about you giong gsr-vtec?

LYNA your inbox is full.

LS is fine. Its cheap, its low compression, its longer stroke, its cheap.

The auction ends on monday night, so I do plan on waiting until then to bid on it.

MissJDM · 04-17-2005, 10:36 PM

PAT, it's now deleted. I get a lot of complaints about my box. To make the rest of you happier (you know who you are), I deleted like 15.

I just realized that I typed "gsr-vtec" instead of "gsr-turbo."
How gay that is.

GT40FIED · 04-17-2005, 10:47 PM

Quote:

Originally posted by MissJDM
I get a lot of complaints about my box.

Oh man...it's too easy.

MissJDM · 04-18-2005, 11:21 AM

Now that it's got room, no one PM'd me.

I did all t hat for nothin.

*pdiggitydogg* · 04-18-2005, 08:10 PM

Well screw it...the dude bid more than Im willing to pay for that block

*pdiggitydogg* · 04-18-2005, 08:52 PM

Holy hell
The seller cancelled the bids of the other guy and I won the block for $100
HA

Neat I own an ls block

CD5Passion · 04-18-2005, 09:52 PM

lol wtf someones lucky

*pdiggitydogg* · 04-18-2005, 10:00 PM

No kidding...I was only going to bid 130 and when I saw that I still wasnt winning I gave up. 5minutes before auction end the current winner changes to me and drops to original price!

I'll be taking the 322 mile road trip the first week of may (hopefully)

ebpda9 · 04-18-2005, 10:07 PM

hmm, where is it at ?

*pdiggitydogg* · 04-18-2005, 10:10 PM

Lemont, Il
I plan on zipping across the state then south and jog to Lemont.

Oh, how is a torque converter attached? Ive seen a few that slide on...do all of them?

thermal · 04-19-2005, 01:14 AM

The TQ converter is attached the same way as a FW on a 5 speed.... unless I'm thinking something else.

Good job mang. If you need stock LS parts LMK. It is a good idea to at least replace the rings. Not hard at all.

GT40FIED · 04-19-2005, 01:15 AM

Yeah...you just bolt that bastard to the flexplate (assuming Hondas have those).

*pdiggitydogg* · 04-19-2005, 07:32 AM

The hell is a flex plate? Is it the same as a drive plate?

Ive been looking at ring replacement diagrams already today

Even if I am going to be piecing this together slowly Im excited.

Arnel, how much do obd2 ls heads go in your area? I saw that sohfast has a complete 97 for $250 I'll probably buy that in june.

GT40FIED · 04-19-2005, 12:25 PM

Quote:

Originally posted by pdiggitydogg
The hell is a flex plate?

Same thing as a flywheel...but for an automatic.

*pdiggitydogg* · 04-19-2005, 12:33 PM

Ah, I guess the name is interchangeable.

drdingo21 · 04-19-2005, 05:42 PM

Coming through Indy?

stop here, and ill have the woman hook you up with women.

*pdiggitydogg* · 04-19-2005, 05:48 PM

I would, but its further south than I'll be going - Im only skimming the corner of Indy, along the shoreline...plus my mom will be going, since she's got the wheels for pickup. (I dont think she'd like me ditching her for women...even though that'd be awesome)

thermal · 04-20-2005, 05:21 AM

Quote:

Originally posted by pdiggitydogg
.... Arnel, how much do obd2 ls heads go in your area? I saw that sohfast has a complete 97 for $250 I'll probably buy that in june.

That price is not bad for an OBD2 LS head. I know that I can find it cheaper. I'll let you know man. Depending on the status of my Teg, I might get rid of my B20 head and go B20VTEC this winter. If I do, I'll hook you up with my current B20 head..... I just dont know what to do yet.

MissJDM · 04-22-2005, 11:08 PM

Do b20vtec and be my buddy, Arnel.

I have a obd1 head if anything ever fails for ya and I'm your last resort.

04-14-2005, 01:53 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Might buy this - little help LS block http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW What should I do with it until I can get a head...and tranny....and all that other fun stuff? How can I clean it up easily? (dont say hot tank) Those tops look pretty damn dirty... Ive always wondered if engines can just sit there like that, and for how long.

04-14-2005, 02:06 PM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	The top of the pistons can really get that dirty... that's normal believe it or not. Use a few cans of brake cleaner and greenie-weenie (green pads). Lots of time will require for that thing to become emaculate. The block (outside) just needs to ge soaked with simple green then wash it off with hot water. If you have a steam cleaner, that will work better. It just really depends on what the owner did while it was sittin like that. If he kept it lubricated and turn the crank at least once every week, then it should be fine. I sold a 96 d-series that sat untouched for 6 months. Now the person who bought it did a compression test and still pulled 140-160 across. __________________ Project Teg Visit the Turbo Forum

04-14-2005, 08:34 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I hear you..... __________________ Project Teg Visit the Turbo Forum

04-14-2005, 09:19 PM	#6
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Actually the worst case scenario is that he's lying through his teeth...but it doesn't seem like that's something you'd lie about (seeing as how it'd be immediately obvious if he was). Hell...for $100 the block itself (without reciprocating assembly) wouldn't be a bad deal. Then again...like I know what bare Honda blocks sell for. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

04-14-2005, 09:46 PM	#8
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	are you going to boost on stock internals or totally build the block? __________________

04-14-2005, 02:36 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	I dont really care about the outside...it'll get dirty anyway and I tend not to care. Im waiting to hear back from the seller to see if he's rotated it at all. It being a 94 I am mildly concerned about siezed parts

04-14-2005, 09:04 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Yay good news He says that he rotates it weekly and oils the cylinders. I hope to be making the drive to get it first week of may. Ive decided that worst case senario I have to replace the rings, but that could be fun

04-14-2005, 09:29 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Right, I figured Id rotate it all when I showed up to pick it up, inspect it all, make sure its kosher. Things can be had cheaper, I know that, but Im tired of trying to find them. This is within driving distance for me too.

04-14-2005, 09:50 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Originally planned on stock, but if I get this, I dont see any reason not to at least get rods now that I think about it

04-16-2005, 12:50 AM	#10
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Didn't we have an old email convo about you giong gsr-vtec? I envy that guy, it's such a bitch to have to package a block to send. __________________ you say it best when you say nothing at all

04-16-2005, 08:46 AM	#11
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	No, not that I can remember anyway. I know I PM'd you to make a ls/vtec write-up though. I think Im getting ahead of myself on this one. Ive started looking at different parts for it already and I havent even put in my bid

04-16-2005, 10:19 AM	#12
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 41 Posts: 9,662	hmm... whats an h22 bare block worth? __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

04-16-2005, 11:03 AM	#13
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	don't place a bid until the last minute. and PAT, I could've sworn you told me you wanted gsr-t, so just to show you how awesome and correct I am, I found and fowarded you the PM. On a side note, I was tempted to start the write up but never knew where to start as I had already post a few here and there. I just figred I'll make one thread when it's all said and done. __________________ you say it best when you say nothing at all

04-17-2005, 10:36 PM	#15
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	PAT, it's now deleted. I get a lot of complaints about my box. To make the rest of you happier (you know who you are), I deleted like 15. I just realized that I typed "gsr-vtec" instead of "gsr-turbo." How gay that is. __________________ you say it best when you say nothing at all

04-18-2005, 11:21 AM	#17
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Now that it's got room, no one PM'd me. I did all t hat for nothin. __________________ you say it best when you say nothing at all

04-18-2005, 08:10 PM	#18
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Well screw it...the dude bid more than Im willing to pay for that block

04-18-2005, 08:52 PM	#19
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Holy hell The seller cancelled the bids of the other guy and I won the block for $100 HA Neat I own an ls block

04-18-2005, 09:52 PM	#20
CD5Passion Registered User Join Date: Nov 2002 Location: Santa Barbara, California Age: 39 Posts: 5,446	lol wtf someones lucky __________________

04-18-2005, 10:00 PM	#21
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	No kidding...I was only going to bid 130 and when I saw that I still wasnt winning I gave up. 5minutes before auction end the current winner changes to me and drops to original price! I'll be taking the 322 mile road trip the first week of may (hopefully)

04-18-2005, 10:07 PM	#22
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	hmm, where is it at ? __________________

04-18-2005, 10:10 PM	#23
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Lemont, Il I plan on zipping across the state then south and jog to Lemont. Oh, how is a torque converter attached? Ive seen a few that slide on...do all of them?

04-19-2005, 01:14 AM	#24
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	The TQ converter is attached the same way as a FW on a 5 speed.... unless I'm thinking something else. Good job mang. If you need stock LS parts LMK. It is a good idea to at least replace the rings. Not hard at all. __________________ Project Teg Visit the Turbo Forum

04-19-2005, 01:15 AM	#25
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Yeah...you just bolt that bastard to the flexplate (assuming Hondas have those). __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

04-19-2005, 07:32 AM	#26
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	The hell is a flex plate? Is it the same as a drive plate? Ive been looking at ring replacement diagrams already today Even if I am going to be piecing this together slowly Im excited. Arnel, how much do obd2 ls heads go in your area? I saw that sohfast has a complete 97 for $250 I'll probably buy that in june.

04-19-2005, 12:33 PM	#28
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Ah, I guess the name is interchangeable.

04-19-2005, 05:42 PM	#29
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	Coming through Indy? stop here, and ill have the woman hook you up with women.

04-19-2005, 05:48 PM	#30
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	I would, but its further south than I'll be going - Im only skimming the corner of Indy, along the shoreline...plus my mom will be going, since she's got the wheels for pickup. (I dont think she'd like me ditching her for women...even though that'd be awesome)

04-22-2005, 11:08 PM	#32
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Do b20vtec and be my buddy, Arnel. I have a obd1 head if anything ever fails for ya and I'm your last resort. __________________ you say it best when you say nothing at all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode