.:HSTuners::

*pdiggitydogg* · 03-31-2005, 03:09 PM

Well how far along are you? Have you gotten the handle off the door yet - so the only thing holding it are the linkages?

The clip on the lock cylinder will come off w/ a small standard screwdriver or a set of bent needle nose pliers (what I used).

Just a tip, so no new parts have to be bought, just unscrew the entire handle from the latch/opening linkage. Count the threads/turns! Its easier that way, if you ask me and works fine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-31-2005, 03:09 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Well how far along are you? Have you gotten the handle off the door yet - so the only thing holding it are the linkages? The clip on the lock cylinder will come off w/ a small standard screwdriver or a set of bent needle nose pliers (what I used). Just a tip, so no new parts have to be bought, just unscrew the entire handle from the latch/opening linkage. Count the threads/turns! Its easier that way, if you ask me and works fine.