.:HSTuners::

soundspeed · 01-20-2005, 10:31 PM

I know for the front you have to pop the hood and remove those 5 or 6 screws that hold down that metal plate at the front. (they may be seized) then there is a screw that you remove from each wheel well It'll be right at the corner of the bumper where it meets the fender, and then I belive it's two bolts that you remove from underneath towards the middle. As for the rear, I'm not sure. Pdigg may have a pic on how to do this.

01-20-2005, 10:31 PM	#2
soundspeed Registered User Join Date: May 2003 Location: Toronto Age: 46 Posts: 336	I know for the front you have to pop the hood and remove those 5 or 6 screws that hold down that metal plate at the front. (they may be seized) then there is a screw that you remove from each wheel well It'll be right at the corner of the bumper where it meets the fender, and then I belive it's two bolts that you remove from underneath towards the middle. As for the rear, I'm not sure. Pdigg may have a pic on how to do this. __________________ Surgeon General Says: It's Okay To Smoke V8's The Only Replacement For Displacement...Is Technology

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode