.:HSTuners::

thermal · 10-16-2004, 04:41 PM

Oil pressure gauge man.

Here's why:
Tap the gauge on the same location where you are tapping your oil supply/feed to the turbo. This way, you can monitor your system for a positive lubrication to the turbo.

It doesnt matter if the oil is whether cold or hot. Better to have a hot or cold oil than not knowing if you have flow/pressure. What is important is to ensure that you have oil flow/pressure to the turbo.

10-16-2004, 04:41 PM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Oil pressure gauge man. Here's why: Tap the gauge on the same location where you are tapping your oil supply/feed to the turbo. This way, you can monitor your system for a positive lubrication to the turbo. It doesnt matter if the oil is whether cold or hot. Better to have a hot or cold oil than not knowing if you have flow/pressure. What is important is to ensure that you have oil flow/pressure to the turbo. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode