Suggestions for getting the allen bolt out....

[94_AcCoRd_EX]

Originally posted by Accord Man
This might seem overkill..

But here's what I did once..

I soldered an allen key into the stripped slot. It worked fine..

I was even able to melt the soldering stuff off the key, so I didnt even have to waste that..


You could do that, or instead of soldering, use some type of mad ass strong adhesive..

Contact cement or a strong epoxy should be up to the task!!



Hope the sun starts to shine on you soon!

That's what I would suggest. We do similar things with stripped screws in RC cars all the time. Go with that, might want to try welding it though. Otherwise epoxy or contact cement should work just fine.