.:HSTuners::

mcruz · 10-04-2004, 08:43 PM

need picks on how to install a "fuel pressure regulator, and fuel pressure gauge, i hear its easy just need some pick to help get started. any idea or links let me know

thermal · 10-05-2004, 05:58 AM

First off, do you know where the stock FPR and fuel filter is? What type of gauge and what type of FPR? Is it rail mounted?

mcruz · 10-05-2004, 06:21 AM

honestly therma I don't know, a lot of the time I can tell you if I was looking at but I don't know, I have only been doing this for year, and most of the I learned have been from doing it. To your question without looking stupid, no I don't were the fpr is at, and it is b&m gauge.

thermal · 10-05-2004, 10:37 AM

If you have a B&M command flo (fuel pressure regulator), click this link:
http://www.prostreetonline.com/pso/p...p?articleid=10

here's what a fuel pressure regulator look like. It's on your fuel rail:

----------------------------------------------------------------------
----------------------------------------------------------------------

The fuel pressure gauge is simple. Find your fuel filter and unscrew the banjo fitting on top. Place the gauge on top and use the fittings it came with. Yours and mine is on the same location.

Look at this picture on the right side of the battery and you'll see a gauge. Mine is NOT a normal install since I have another sensor T'd off beside the gauge for another fuel pressure gauge that is read remotely.

mcruz · 10-05-2004, 10:48 AM

Thanks a lot, I am trying to learn all this stuff, but now with what you showed me I will try to do it tonight, thanks again yes I am a NEWBE, anything you have let me know

thermal · 10-05-2004, 01:02 PM

goodluck...

mcruz · 10-05-2004, 01:07 PM

You are the man, thanks a bunch, good luck on your new project

thermal · 10-06-2004, 05:21 AM

np...

mcruz · 10-06-2004, 06:27 PM

hey what will be a good number to adjust it to, when i started before changing it, we were at 37, right now i am running very rich any idea

thermal · 10-06-2004, 06:40 PM

37 psi is actually about normal. Mine sits at 40 psi.

How can you tell if you are running rich? Do you have a wideband system? Let me know.....

mcruz · 10-06-2004, 09:19 PM

Quote:

Originally posted by thermalfi'd16
37 psi is actually about normal. Mine sits at 40 psi.

How can you tell if you are running rich? Do you have a wideband system? Let me know.....

well i dont want to sound stuipd but when i am acclerting my air/fuel gauge is staying at rich, as soon as i stop to falls to lean, and friend of my says that how you would know, i guess is that right or wrong. is my friend wrong ,

thermal · 10-06-2004, 09:32 PM

well, any narrow band is not really that acurate but your friend is right as well. Narrow bands are only worthy of it's function on WOT (wide open throttle). But then again, GReddy emanage base map is notorious for having a "rich" set-up anyway. If you plan on keeping that emanage, I recommend to get the rest of the hardware/software to be able to tune it.....

mcruz · 10-06-2004, 09:36 PM

ok thanks, but i want to go with hondata, i want to be able to control how my car runs, and i did it myself and i am done. thanks for the pic's they help out a lot. FOCUSHARD

mcruz · 10-11-2004, 03:08 PM

I am done with the project, my only question is my gauge is set at 39, when open throttle it hits 46, I am thinking about putting it at 34 and letting it hit 39 or 40 what do you think

thermal · 10-12-2004, 09:53 PM

You're talking about fuel pressure right?

I really cant say where it should be cuz each motor reacts different. There are many variable to this, that is why you should get it dyno tuned. Sorry man....

mcruz · 10-13-2004, 12:48 PM

OK I am working on the funds now for that, hey not to jump off subject I got a guy that to sell a s100 hondata w/map, he paid 400 I was thinking about it what do you think? And any other things I need to ask him for?

10-04-2004, 08:43 PM	#1
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	need help need picks on how to install a "fuel pressure regulator, and fuel pressure gauge, i hear its easy just need some pick to help get started. any idea or links let me know __________________ FOCUSHARD Last edited by mcruz : 10-04-2004 at 08:46 PM.

10-05-2004, 05:58 AM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	First off, do you know where the stock FPR and fuel filter is? What type of gauge and what type of FPR? Is it rail mounted? __________________ Project Teg Visit the Turbo Forum

10-05-2004, 06:21 AM	#3
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	honestly therma I don't know, a lot of the time I can tell you if I was looking at but I don't know, I have only been doing this for year, and most of the I learned have been from doing it. To your question without looking stupid, no I don't were the fpr is at, and it is b&m gauge. __________________ FOCUSHARD

10-05-2004, 10:37 AM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	If you have a B&M command flo (fuel pressure regulator), click this link: http://www.prostreetonline.com/pso/p...p?articleid=10 here's what a fuel pressure regulator look like. It's on your fuel rail: ---------------------------------------------------------------------- ---------------------------------------------------------------------- The fuel pressure gauge is simple. Find your fuel filter and unscrew the banjo fitting on top. Place the gauge on top and use the fittings it came with. Yours and mine is on the same location. Look at this picture on the right side of the battery and you'll see a gauge. Mine is NOT a normal install since I have another sensor T'd off beside the gauge for another fuel pressure gauge that is read remotely. __________________ Project Teg Visit the Turbo Forum

10-05-2004, 10:48 AM	#5
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	Thanks a lot, I am trying to learn all this stuff, but now with what you showed me I will try to do it tonight, thanks again yes I am a NEWBE, anything you have let me know __________________ FOCUSHARD

10-05-2004, 01:02 PM	#6
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	goodluck... __________________ Project Teg Visit the Turbo Forum

10-05-2004, 01:07 PM	#7
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	You are the man, thanks a bunch, good luck on your new project __________________ FOCUSHARD

10-06-2004, 05:21 AM	#8
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	np... __________________ Project Teg Visit the Turbo Forum

10-06-2004, 06:27 PM	#9
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	hey what will be a good number to adjust it to, when i started before changing it, we were at 37, right now i am running very rich any idea __________________ FOCUSHARD

10-06-2004, 06:40 PM	#10
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	37 psi is actually about normal. Mine sits at 40 psi. How can you tell if you are running rich? Do you have a wideband system? Let me know..... __________________ Project Teg Visit the Turbo Forum

10-06-2004, 09:32 PM	#12
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	well, any narrow band is not really that acurate but your friend is right as well. Narrow bands are only worthy of it's function on WOT (wide open throttle). But then again, GReddy emanage base map is notorious for having a "rich" set-up anyway. If you plan on keeping that emanage, I recommend to get the rest of the hardware/software to be able to tune it..... __________________ Project Teg Visit the Turbo Forum

10-06-2004, 09:36 PM	#13
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	ok thanks, but i want to go with hondata, i want to be able to control how my car runs, and i did it myself and i am done. thanks for the pic's they help out a lot. FOCUSHARD __________________ FOCUSHARD

10-11-2004, 03:08 PM	#14
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	I am done with the project, my only question is my gauge is set at 39, when open throttle it hits 46, I am thinking about putting it at 34 and letting it hit 39 or 40 what do you think __________________ FOCUSHARD

10-12-2004, 09:53 PM	#15
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	You're talking about fuel pressure right? I really cant say where it should be cuz each motor reacts different. There are many variable to this, that is why you should get it dyno tuned. Sorry man.... __________________ Project Teg Visit the Turbo Forum

10-13-2004, 12:48 PM	#16
mcruz 2nd Gear Join Date: Jun 2004 Location: chicago Age: 48 Posts: 126	OK I am working on the funds now for that, hey not to jump off subject I got a guy that to sell a s100 hondata w/map, he paid 400 I was thinking about it what do you think? And any other things I need to ask him for? __________________ FOCUSHARD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode