new parts

[thermal]

Originally posted by JDMFantasy2k
Got another new part today.........
thanks arnel, since i know you're the one who's going to answer this post

lol.....

Anyway, here's what you should do. First off, do not tap your turbo timer to the ECU. Use the ignition wires. So you'll need to undo the ignition cover and follow the wires. The wires will be thicker in gauge..... like an 8 gauge. Believe it or not, most JDM turbo timers have the same wiring sequence. Use this:
-red wire on timer to solid white wire on ignition
-blue wire on timer to solid yellow wire on ignition
-green wire on timer to black/yellow wire on ignition
-ground the black wire and you're done.

this is all you need for the basic function of the timer. my e-brake wire is not tapped in, along with the speedo wire. If you want to use it then go ahead. I just like the basic countdown feature.

If it doesnt work, switch the blue and green wire tap but I'm almost 100% that it will work the way I discussed it.

Later brotha....