.:HSTuners::

01-13-2002, 12:36 AM

heh whataya know i found it ;D

and it's in the fuse box not behind the glove compartment

Step 1. Go to the fuse box and remove the flasher:

Step 2. Open up the flasher and look for this resistor:

Step 3. You will need to change this resistor to make your signal blink faster. The resistance is around 90K If you want to make your signal blink twice as fast as stock, then you would replace the resistor with a 45K.

The lower the resistance, the faster it will blink.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-13-2002, 12:36 AM	#1
BrandonClaps Posts: n/a	heh whataya know i found it ;D and it's in the fuse box not behind the glove compartment Step 1. Go to the fuse box and remove the flasher: Step 2. Open up the flasher and look for this resistor: Step 3. You will need to change this resistor to make your signal blink faster. The resistance is around 90K If you want to make your signal blink twice as fast as stock, then you would replace the resistor with a 45K. The lower the resistance, the faster it will blink.