.:HSTuners::

03-19-2004, 06:56 PM

Ok, I just installed (myself) my white-face glo-gauge dash kit. Does anyone know where I hook it into a power supply? I don't know how to power it.

Any article links, advice...anything really, I would REALLY appreciate. Right now my car is sitting the garage with the dash in pieces everywhere.

- Dzur

ShagginJet · 03-19-2004, 07:39 PM

any 12 volt source will do. It's higly suggested that you hook it to the power source that lights your gauges when your lights are on.

*pdiggitydogg* · 03-19-2004, 07:40 PM

My advice and experience is to return them...chances are very good that you will break a needle putting them on and break your cluster (you cannot remove the needles).

But you can just tap the headlight fuse under the dash for power.

Shaved &/or Laid · 03-19-2004, 07:52 PM

when i had my GAYges i hooked them up to the running light fuse too. P beat me to it

Fatal070 · 03-19-2004, 08:05 PM

dont hook them up to a fuse they'll be running constintly when you car is on.... the best thing to do is hook them up to your headlights and im not sure how to do that my friend did mine ... i like my white gauges .... *damn guess i can't be JDM* haha no but really i dont think there that bad but i guess it depends on your taste ... i do like the jdm clusters very nice...

*KwikR6* · 03-20-2004, 01:12 AM

Hook them up to when your headlights are on...
Not your DRL's or City lights...I don't think you guys have those..but meh!

GT40FIED · 03-20-2004, 03:49 AM

Hey General...if you want some help I, much like a bad comedian, will be in Kansas City all week. Fer shizzle.

V8killimports · 03-20-2004, 07:54 AM

Quote:

Originally posted by GT40FIED
Hey General...if you want some help I, much like a bad comedian, will be in Kansas City all week. Fer shizzle.

Hook them up to an accesories fuse.. that way they will only be on when the car is on.

MAXed Out · 03-20-2004, 10:08 AM

Just hook them up to the headlight. Im not sure how to cause Hondamaniac did mine for me!

C's 94 InTeGrA · 03-20-2004, 01:27 PM

mine kept coming off.. i put 2 sided tape that came with them and they kept coming off and was preventing my needles from moving so i just ripped them out and did a custom effect with my new ones. Since the bulbs in the cluster take a 194R bulb i took ones at advance auto and plugged into the back where the stock ones are and now my cluster looks like the RSX ones

03-20-2004, 08:04 PM

Wow...lots of advice. Well, here's what happend...

I gutted the dash, and nearly destroyed everything. HAHAH...well, turns out those needles [i]do[I/] come off....BUT ONLY WITH PLYERS!!!

Sooo...thanks to you guys' advice, I hooked up the gauge's, and they look really cool. However, there was a slight problem.

I'm cruising down 58 highway going appx. 45 MPH in 4th gear. I look down at my fancy new gauge cluster...and....it says I'm going 80 MPH @ 5,000 RPM. ARGH!! NOOO!!!

Well, I fixed the needles mostly..however, the RPMS's are still a little bit off. Oh well...live and learn I guess.

- Dzur

03-22-2004, 11:58 AM

You don't need to take the needles off, it slides over the needles. However, make sure the gauges don't impeed the movement of the needles.

Just push them all the way to the right and make sure the needle goes back to the pin smoothly.

And just hook them to one of your headlight fuses.

Did you get my email on all this?

And did ya figure the shift knob too?

03-23-2004, 11:01 AM

Just wondering about the shift knob man? I sent you the email on it.

Obviously you got the gauges in judging by your other thread. Tell me you didn't pull a bunch of stuff apart and just stuck the power in one of your headlight fuses.

03-23-2004, 11:18 AM

Uh...actually, yes.

Sort of.

I hooked the power into my running light fuse.

- Dzur

03-23-2004, 11:52 AM

And the shift knob? Did you understand my directions?

03-19-2004, 06:56 PM	#1
GeneralDzur Posts: n/a	How do I...ugh...please help Ok, I just installed (myself) my white-face glo-gauge dash kit. Does anyone know where I hook it into a power supply? I don't know how to power it. Any article links, advice...anything really, I would REALLY appreciate. Right now my car is sitting the garage with the dash in pieces everywhere. - Dzur

03-19-2004, 07:39 PM	#2
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	any 12 volt source will do. It's higly suggested that you hook it to the power source that lights your gauges when your lights are on. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

03-19-2004, 07:52 PM	#4
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 39 Posts: 853	when i had my GAYges i hooked them up to the running light fuse too. P beat me to it __________________ Doody Ej1 Yse.

03-19-2004, 08:05 PM	#5
Fatal070 Registered User Join Date: Apr 2002 Location: New Castle , Pa Age: 41 Posts: 1,299	dont hook them up to a fuse they'll be running constintly when you car is on.... the best thing to do is hook them up to your headlights and im not sure how to do that my friend did mine ... i like my white gauges .... damn guess i can't be JDM haha no but really i dont think there that bad but i guess it depends on your taste ... i do like the jdm clusters very nice... __________________

03-20-2004, 01:12 AM	#6
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 45 Posts: 8,871	Hook them up to when your headlights are on... Not your DRL's or City lights...I don't think you guys have those..but meh! __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

03-19-2004, 07:40 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	My advice and experience is to return them...chances are very good that you will break a needle putting them on and break your cluster (you cannot remove the needles). But you can just tap the headlight fuse under the dash for power.

03-20-2004, 03:49 AM	#7
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Hey General...if you want some help I, much like a bad comedian, will be in Kansas City all week. Fer shizzle. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

03-20-2004, 10:08 AM	#9
MAXed Out 6th Gear Join Date: Jan 2003 Location: Cleveland, OH Age: 39 Posts: 1,974	Just hook them up to the headlight. Im not sure how to cause Hondamaniac did mine for me! __________________ SHIFT_MyNuts Some people call it an obsession I just call it my maxima 1997 Maxima SE 5spd, Stillen Body Kit, Warpspeed Y & B pipes, Magnaflow Muffler, Koni Yellows & Tein S-tech springs, JVC Headunit, Directed 7" in dash screen,Stillen Intake, red/clear tail lights, AE mod, Paceseter STS, EL-Glow Gauges, Clutchmasters FX300 Clutch, rebuilt tranny, 19" Mille Miglia Evo 5's with Pirelli Pzero's(summer), 18" Hp D-10 hyper silver wrapped in Goodyear ultra HPR, SPW front strut bar, Helios 7000k HID, Motostorm UDP, Viper 5000Vx alarm, 2 12" PowerClass 124 subs, Kenwood 1200 Watt amp, DVD Changer

03-20-2004, 01:27 PM	#10
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	mine kept coming off.. i put 2 sided tape that came with them and they kept coming off and was preventing my needles from moving so i just ripped them out and did a custom effect with my new ones. Since the bulbs in the cluster take a 194R bulb i took ones at advance auto and plugged into the back where the stock ones are and now my cluster looks like the RSX ones __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-20-2004, 08:04 PM	#11
GeneralDzur Posts: n/a	Wow...lots of advice. Well, here's what happend... I gutted the dash, and nearly destroyed everything. HAHAH...well, turns out those needles [i]do[I/] come off....BUT ONLY WITH PLYERS!!! Sooo...thanks to you guys' advice, I hooked up the gauge's, and they look really cool. However, there was a slight problem. I'm cruising down 58 highway going appx. 45 MPH in 4th gear. I look down at my fancy new gauge cluster...and....it says I'm going 80 MPH @ 5,000 RPM. ARGH!! NOOO!!! Well, I fixed the needles mostly..however, the RPMS's are still a little bit off. Oh well...live and learn I guess. - Dzur

03-22-2004, 11:58 AM	#12
SolPol Posts: n/a	You don't need to take the needles off, it slides over the needles. However, make sure the gauges don't impeed the movement of the needles. Just push them all the way to the right and make sure the needle goes back to the pin smoothly. And just hook them to one of your headlight fuses. Did you get my email on all this? And did ya figure the shift knob too?

03-23-2004, 11:01 AM	#13
SolPol Posts: n/a	Just wondering about the shift knob man? I sent you the email on it. Obviously you got the gauges in judging by your other thread. Tell me you didn't pull a bunch of stuff apart and just stuck the power in one of your headlight fuses.

03-23-2004, 11:18 AM	#14
GeneralDzur Posts: n/a	Uh...actually, yes. Sort of. I hooked the power into my running light fuse. - Dzur

03-23-2004, 11:52 AM	#15
SolPol Posts: n/a	And the shift knob? Did you understand my directions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode