amp question

[AkimboStylee]

Originally posted by VR4_Craver
if your powering two subs you would probably wanna go with a 2 channel amp...you know 1 channel per speaker.

not true, wire the subs down to either 2 or 4 ohm, and run it in series to a mono amp. mono amps run cooler and are smaller, so you can get mre power. an amp loses half of its power through heat, whereas a class d ( mono only) produces less heat due to the fact that it only has 1 channel to power not two.

if you do run a subs off multichannel amps just bridge the power of two channels, you will produce a much cleaner sound.