.:HSTuners::

*AzCivic* · 11-21-2003, 05:28 PM

a valve adjustment is easy, you just need a good torque wrench, manual, feeler guage, and patience. if you do need a valve adjustment you'll hear ticking coming from the engine.

as for your popping sound...does the car feel like it drives differently?

oh and you CAN use a valve adjustment to increase performance! the trick is to tighten the valve lash a little tighter than factory specs, which will result in a tad bit higher lift(not anything like a aftermarket cam, but its free!) the only draw back is the you might have idling problems, which are usually solved by raising the idle speed a little.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-21-2003, 05:28 PM	#1
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	a valve adjustment is easy, you just need a good torque wrench, manual, feeler guage, and patience. if you do need a valve adjustment you'll hear ticking coming from the engine. as for your popping sound...does the car feel like it drives differently? oh and you CAN use a valve adjustment to increase performance! the trick is to tighten the valve lash a little tighter than factory specs, which will result in a tad bit higher lift(not anything like a aftermarket cam, but its free!) the only draw back is the you might have idling problems, which are usually solved by raising the idle speed a little.