.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Honda / Acura Cars > Civic/Del Sol
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 11-12-2003, 02:50 PM   #1
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
See dude, you screwed me up when you have a username y2k-honda. I thought you have a 2000 Civic. Anyway, it doesnt matter since I based all my replies on a SOHC VTEC.

I have the same turbo kit..... well, what's left of it. I do not recommend to immediately run higher than 5.5 psi stock GReddy setting. Leave it alone for now and let your car get used to it and your driving habits compensate to it. GReddy will not set that at 5.5 psi if it was not safe at that level. You can run max of 8 psi with the kit without any modification except a boost controller. However, I highly advice to get an intercooler before you leave the 5.5 psi range. At the same time, you should also get a high volume fuel pump (255 LPH). If you boost at above 8 psi, you have to get a set of bigger injectors with a minimum of 400cc to compensate with your injector duty cycle.
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:04 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com