.:HSTuners::::Hondas Wanted:: |
11-11-2003, 10:52 PM
|
#10 |
|
Registered User
Join Date: Jul 2002
Location: ECUSA
Age: 48
Posts: 2,693
|
As far as the masters are concerned...
The 15/16ths is obviously smaller (1/16th of an inch smaller)... but it bolts DIRECTLY up... no line bending (only to IT'S booster NOT the stock civic one.)... I have this master and it's fine... The 1" requires you to bend the stock lines... it's not that bad but I'll take bolt up anyday... Also there is a 15/16ths that will bolt to your booster it's in the thread on h-t that pdig mentioned... also don't forget the proportioning valve....
__________________
I am an A$$hole... take anything I say to heart at YOUR OWN RISK... |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode