.:HSTuners::

thermal · 10-22-2003, 11:18 PM

He he he he... you're right. We werent arguing. Those company's sell those kits as is. The only company that offers option is MAXREV. However, their option is only on the trim sizes such as a T3T04e or T3T04b.

Taken from:
http://www.hstuners.com/forums/showt...=&threadid=185
A/R -A/R means area/radius. It is a formula to determine the size of the compressor and its turbine-housing configuration. Sounds like a lot but to make it simple, the smaller the A/R the faster your spool up time. But the downside is that the top end will suffer and choke off. If you have a large A/R you will be able to flow more air but you will experience a longer spool up time and poor response also known as turbo lag.

peace out cashiz

10-22-2003, 11:18 PM	#11
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	He he he he... you're right. We werent arguing. Those company's sell those kits as is. The only company that offers option is MAXREV. However, their option is only on the trim sizes such as a T3T04e or T3T04b. Taken from: http://www.hstuners.com/forums/showt...=&threadid=185 A/R -A/R means area/radius. It is a formula to determine the size of the compressor and its turbine-housing configuration. Sounds like a lot but to make it simple, the smaller the A/R the faster your spool up time. But the downside is that the top end will suffer and choke off. If you have a large A/R you will be able to flow more air but you will experience a longer spool up time and poor response also known as turbo lag. peace out cashiz __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode