.:HSTuners::

nonovurbizniz · 04-17-2003, 11:47 PM

I have nothing but stock lugs... They're on heliums so...

A. I had to pull off the plastic rings on my lugs to hold down the hub caps on the stock wheels.

B. They aren't beveled at the same angle as the wheels so they don't snug up nice.

C. They're too bulky to get a socket around w/o ruining my soft cheap wheels.

And I have 11 lb wheels so I'm not gunna ADD weight to it..

Just seems pointless. and the stock ones are HEAVY and I've used the ones TownFair and other places give out...they're heavier than the stock ones and bigger too (od).

04-17-2003, 11:47 PM	#3
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	I have nothing but stock lugs... They're on heliums so... A. I had to pull off the plastic rings on my lugs to hold down the hub caps on the stock wheels. B. They aren't beveled at the same angle as the wheels so they don't snug up nice. C. They're too bulky to get a socket around w/o ruining my soft cheap wheels. And I have 11 lb wheels so I'm not gunna ADD weight to it.. Just seems pointless. and the stock ones are HEAVY and I've used the ones TownFair and other places give out...they're heavier than the stock ones and bigger too (od). __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode