.:HSTuners::

11-24-2002, 08:25 PM

Hi all! I am new to car modifications and I just bought a pair of Blazing Windscreen Washer lights for $15. I own a Honda Civic Lx 2002, 4 doors.

The Windscreen Washer lights beam blue lights at night and it is very cool. I know that I have to remove my old windscreen washers and put up new ones. However, I don't know how to connect the wires. What should I do?

From the instructions, it says the following:

- Remove the original washers
- Choose a properly pad according to the hold of hood
- Install Blazing windscreen washer
- Connect red wire to anod wire of corner light and black wire to ground wire
- Use needle to adjust the spout angle

Can someone help me, please?

Tekun

94_AcCoRd_EX · 11-24-2002, 08:34 PM

You could wire the LEDs into the parking lights if you want to. If you'd like a separate switch, you could wire it with a relay.

11-24-2002, 08:51 PM

Hi,

My problem is that I don't know much about electronics on my car. But, I am willing to learn.

How do I locate the parking wires in my car? Once I found those wires, I am sure that the are connected together and I will need to cut the off so that I could connect my Windscreen Washer wires to those. Is it like connecting home appliances wires?

Sorry for my igorance, but I read my Honda Driver manual and it does not say anywhere. Where can I get more information?

Thanks!

ebpda9 · 11-24-2002, 09:04 PM

i had them wired to my headlight relay, but i don't know where that is at on your civic. on mine it is on the right innerfender

11-24-2002, 09:56 PM

I have mine wired to a switch on my dash. Let me know if you're interested in doing that and I'll help you. That way you can turn them off if cops are around...

11-25-2002, 09:35 AM

Hi jonhenry15,

Sure, I would like to know how to do this. It would be cool. But, first thing is to find out where my wires are located. Anyone has a clue? Or, where I can buy a more detailed manufacturer instrunctions manual of my Honda Civic Lx 2002?

thanks!

12-10-2002, 02:37 AM

The easist thing would be to locate the wiring attached to the parking-lamp bulb on the back of your headlight assembly. In a 2002 model, you may need to remove a front wheel and pull back the fender liner. Get a curcuit tester, and attach the lead to a grounding point on the car. Use the tester to find the wire that has power when you turn on your parking lamps. As soon as you find that, use a wire crimp to connect the two. As for the negative wire, I attached it to one of the bolts in the engine bay, as they are normally good grounding points since they run right into the chassis.

blind34_1 · 12-10-2002, 01:30 PM

one of the easiest ways is to just tap into your cig lighter. this puts a 12v line right close to where you should have a switch. The other ways work too, but if you dont know much, this is probably easyist. if jonhenry hasnt already helped you, PM me and i'll get you set up.

11-24-2002, 08:25 PM	#1
Tekun Posts: n/a	Help: Blazing Windscreen Washer Lights Hi all! I am new to car modifications and I just bought a pair of Blazing Windscreen Washer lights for $15. I own a Honda Civic Lx 2002, 4 doors. The Windscreen Washer lights beam blue lights at night and it is very cool. I know that I have to remove my old windscreen washers and put up new ones. However, I don't know how to connect the wires. What should I do? From the instructions, it says the following: - Remove the original washers - Choose a properly pad according to the hold of hood - Install Blazing windscreen washer - Connect red wire to anod wire of corner light and black wire to ground wire - Use needle to adjust the spout angle Can someone help me, please? Tekun

11-24-2002, 08:34 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	You could wire the LEDs into the parking lights if you want to. If you'd like a separate switch, you could wire it with a relay. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

11-24-2002, 09:04 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i had them wired to my headlight relay, but i don't know where that is at on your civic. on mine it is on the right innerfender __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-24-2002, 08:51 PM	#3
Tekun Posts: n/a	Hi, My problem is that I don't know much about electronics on my car. But, I am willing to learn. How do I locate the parking wires in my car? Once I found those wires, I am sure that the are connected together and I will need to cut the off so that I could connect my Windscreen Washer wires to those. Is it like connecting home appliances wires? Sorry for my igorance, but I read my Honda Driver manual and it does not say anywhere. Where can I get more information? Thanks!

11-24-2002, 09:56 PM	#5
jonhenry15 Posts: n/a	I have mine wired to a switch on my dash. Let me know if you're interested in doing that and I'll help you. That way you can turn them off if cops are around...

11-25-2002, 09:35 AM	#6
Tekun Posts: n/a	Hi jonhenry15, Sure, I would like to know how to do this. It would be cool. But, first thing is to find out where my wires are located. Anyone has a clue? Or, where I can buy a more detailed manufacturer instrunctions manual of my Honda Civic Lx 2002? thanks!

12-10-2002, 02:37 AM	#7
hondafetish Posts: n/a	The easist thing would be to locate the wiring attached to the parking-lamp bulb on the back of your headlight assembly. In a 2002 model, you may need to remove a front wheel and pull back the fender liner. Get a curcuit tester, and attach the lead to a grounding point on the car. Use the tester to find the wire that has power when you turn on your parking lamps. As soon as you find that, use a wire crimp to connect the two. As for the negative wire, I attached it to one of the bolts in the engine bay, as they are normally good grounding points since they run right into the chassis.

12-10-2002, 01:30 PM	#8
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 41 Posts: 1,813	one of the easiest ways is to just tap into your cig lighter. this puts a 12v line right close to where you should have a switch. The other ways work too, but if you dont know much, this is probably easyist. if jonhenry hasnt already helped you, PM me and i'll get you set up.