.:HSTuners::

*pdiggitydogg* · 12-05-2002, 12:58 PM

ok Im pretty pissed right now. I called my fav suspension place and they only install their own parts (supplied), same goes for every other suspension shop in my area, except for one place that says it takes 8 hours and they will charge me $400. Thats almost what i paid for em. So Im going to do it myself. Is this more than I want to get into? Can I do this with the limited knowlege that I have? Granted I plan on going and buying a manual first but can i do this? I know I'll have to take it in for alignment after.

12-05-2002, 01:25 PM

It's not too bad, what are you installing? just the springs? or the spring and shock assembly?

94_AcCoRd_EX · 12-05-2002, 01:45 PM

You'll need to go rent a spring compressor to get your stock spring off the assembly so you cau reuse the top mounts. I'm going to have mine done when I get them because I don't have the tools or space to try it myself. The shop I'd get them from charges $100 to install.

TeriyakiBroccoli · 12-05-2002, 06:01 PM

didn't he get a tokico illumina full coil setup? he doesn't even need the stock assembly any more.. So, it'll be extremely easy to install. you dont even need the spring compressor.

12-05-2002, 06:04 PM

agreed.. defiantely do NOT need the compressor.. actualy when we did ours (coil overs.. disasembly of the shock tower) we didn't use a compressor... and it went fine

drdingo21 · 12-05-2002, 06:51 PM

Quote:

Originally posted by 94_AcCoRd_EX
You'll need to go rent a spring compressor to get your stock spring off the assembly so you cau reuse the top mounts. I'm going to have mine done when I get them because I don't have the tools or space to try it myself. The shop I'd get them from charges $100 to install.

autozone will rent one to you, all you have to do is putt a 100 deposit down and you get it back when you bring the tool back. But wehn me lowered my friends avenger he didn't need a spring compreser, the new springs were small enough to just fit in there. Also dont get the car aligned right away, wait a couple of days for the springs to settle.

*pdiggitydogg* · 12-05-2002, 10:25 PM

phat yo guess I'll try it this weekend. Balls out. If I get to a point where I cant do it w/o some outside help I'll post another, so you guys gotta check this on saturday night!

TeriyakiBroccoli · 12-05-2002, 10:44 PM

heres a plan, lets help eachother!!

im installing my coilovers as well.. but they're just sleeves :(

*pdiggitydogg* · 12-05-2002, 10:53 PM

Have you been to JDMfan.com?http://www.jdmfan.com/technical/susp...eed_coilovers/

That should help. JDMfan has some really detailed info. Thats where I learned how to advance my timing too.

*pdiggitydogg* · 12-05-2002, 10:54 PM

hmm...now that i read over the info that there is there...I could use it too

TeriyakiBroccoli · 12-05-2002, 11:27 PM

I read over it too, seems relatvely painless.

ebpda9 · 12-05-2002, 11:48 PM

it's not that hard to install. usually i can do it on an accord in about 3 hrs, but it took 4 days for mine to have the front budhings pressed out and have them replaced with polyurethane bushings

TeriyakiBroccoli · 12-16-2002, 06:48 PM

I posted a how-to install coilover sleeves.. in the "how to" section.

All you have to do is follow the instructions except omit the part when i'm talking about swapping the springs. You just need to remove your strut assembly and slap in the tokico ones. should take you no more than 2 hrs with a friend. (if that even..)

*pdiggitydogg* · 12-16-2002, 07:16 PM

awesome

drdingo21 · 12-16-2002, 07:30 PM

did you ever get it done? how about some pics!

*pdiggitydogg* · 12-16-2002, 07:43 PM

no its too cold to do it right now and i have no one to help...plus im being really lazy. I think later this week its supposed to be in the 50s...maybe Ill do it then

TeriyakiBroccoli · 12-16-2002, 10:35 PM

gl with it.

TeriyakiBroccoli · 12-16-2002, 10:36 PM

Yours is actually a 1 man job. If you can get like a buddy to come over, it doesn't matter if he/she knows anything about cars. Just get them to hold the strut while you tighten the top or something.

12-05-2002, 12:58 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	installing my coilovers ok Im pretty pissed right now. I called my fav suspension place and they only install their own parts (supplied), same goes for every other suspension shop in my area, except for one place that says it takes 8 hours and they will charge me $400. Thats almost what i paid for em. So Im going to do it myself. Is this more than I want to get into? Can I do this with the limited knowlege that I have? Granted I plan on going and buying a manual first but can i do this? I know I'll have to take it in for alignment after.

12-05-2002, 01:45 PM	#3
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	You'll need to go rent a spring compressor to get your stock spring off the assembly so you cau reuse the top mounts. I'm going to have mine done when I get them because I don't have the tools or space to try it myself. The shop I'd get them from charges $100 to install. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

12-05-2002, 11:27 PM	#11
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	I read over it too, seems relatvely painless. __________________ everyone loves the turbizzim.

12-05-2002, 11:48 PM	#12
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	it's not that hard to install. usually i can do it on an accord in about 3 hrs, but it took 4 days for mine to have the front budhings pressed out and have them replaced with polyurethane bushings __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-05-2002, 01:25 PM	#2
iRACEmyCTR Posts: n/a	It's not too bad, what are you installing? just the springs? or the spring and shock assembly?

12-05-2002, 06:01 PM	#4
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	didn't he get a tokico illumina full coil setup? he doesn't even need the stock assembly any more.. So, it'll be extremely easy to install. you dont even need the spring compressor.

12-05-2002, 06:04 PM	#5
oc civic Posts: n/a	agreed.. defiantely do NOT need the compressor.. actualy when we did ours (coil overs.. disasembly of the shock tower) we didn't use a compressor... and it went fine

12-05-2002, 10:25 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	phat yo guess I'll try it this weekend. Balls out. If I get to a point where I cant do it w/o some outside help I'll post another, so you guys gotta check this on saturday night!

12-05-2002, 10:44 PM	#8
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	heres a plan, lets help eachother!! im installing my coilovers as well.. but they're just sleeves :(

12-05-2002, 10:53 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	Have you been to JDMfan.com?http://www.jdmfan.com/technical/susp...eed_coilovers/ That should help. JDMfan has some really detailed info. Thats where I learned how to advance my timing too.

12-05-2002, 10:54 PM	#10
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	hmm...now that i read over the info that there is there...I could use it too

12-16-2002, 06:48 PM	#13
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	I posted a how-to install coilover sleeves.. in the "how to" section. All you have to do is follow the instructions except omit the part when i'm talking about swapping the springs. You just need to remove your strut assembly and slap in the tokico ones. should take you no more than 2 hrs with a friend. (if that even..)

12-16-2002, 07:16 PM	#14
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	awesome

12-16-2002, 07:30 PM	#15
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	did you ever get it done? how about some pics!

12-16-2002, 07:43 PM	#16
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	no its too cold to do it right now and i have no one to help...plus im being really lazy. I think later this week its supposed to be in the 50s...maybe Ill do it then

12-16-2002, 10:35 PM	#17
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	gl with it.

12-16-2002, 10:36 PM	#18
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	Yours is actually a 1 man job. If you can get like a buddy to come over, it doesn't matter if he/she knows anything about cars. Just get them to hold the strut while you tighten the top or something.