.:HSTuners::

12-19-2002, 07:52 AM

I am new here. Can anyone offer advise for my problem. I have an 89 Honda Accord. 2lt eng that developed a front main oil seal leak. I accessed the seal and removed it. Checked the ridge of the crank and wall for any scratches/gouges and it was smooth. I installed a new seal and it continued to leak (same pace) A friend suggested a shim seal "sleeve" so tried this with a new oil seal and it continues to leak (same pace). The engine runs smooth with no apparent balance problems. Any suggestions? Thanks for any imput... Howard from Florida

12-24-2002, 12:38 AM

The oil is coming from your balance shaft which is above and to the front of the car, compared to the crank. You will need the seal and a seal retainer that goes on top of the seal. As the seal has a tendency of walking and unseating, creating the leak.

12-19-2002, 07:52 AM	#1
truth Posts: n/a	oil leak I am new here. Can anyone offer advise for my problem. I have an 89 Honda Accord. 2lt eng that developed a front main oil seal leak. I accessed the seal and removed it. Checked the ridge of the crank and wall for any scratches/gouges and it was smooth. I installed a new seal and it continued to leak (same pace) A friend suggested a shim seal "sleeve" so tried this with a new oil seal and it continues to leak (same pace). The engine runs smooth with no apparent balance problems. Any suggestions? Thanks for any imput... Howard from Florida

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-24-2002, 12:38 AM	#2
Greasemonkey75 Posts: n/a	The oil is coming from your balance shaft which is above and to the front of the car, compared to the crank. You will need the seal and a seal retainer that goes on top of the seal. As the seal has a tendency of walking and unseating, creating the leak.