.:HSTuners::

02-11-2004, 09:53 PM

Hey I have a question. I just got a B16a1 for my 1991 Integra. I was wondering what parts should I look up to fit this engine in my car. I dont think I can do any engine mods until I know what year and model. Should i look at 99-00 civic si or 91 integra.

02-11-2004, 10:10 PM

you look up the mods normally for the model of the ride it came out of...As rule of thumb...

*pdiggitydogg* · 02-11-2004, 10:16 PM

its a b series so all parts are interchangable
(minus the red-headed stepchild of the b's from the preludes)

MAXed Out · 02-11-2004, 11:09 PM

I think the parts should fit the car and the motor. u should of got a b18c in my opinion but it's ur ride!

IALuder · 02-12-2004, 01:30 PM

man the old school torqueless wonder.

i havent heard of this motor in awhile. you deffenetly need to get motor and tranny mounts to make it fit.

Shaved &/or Laid · 02-12-2004, 08:21 PM

lets put it this way.

your motor can use the stock mounts, B=B like pdiggity said. The only thing is the tranny. i have a 1st gen b16 bottom end cause i threw a rod on my SiRII. everything else is EJ1 spec (95). Cable tranny vs hydro tranny etc. DA mounts are DA mounts and should bolt on. So if you had a b18a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z in there, youll be fine. Stock - stock.

nonovurbizniz · 02-12-2004, 11:31 PM

You threw a rod???

*pdiggitydogg* · 02-12-2004, 11:34 PM

you never saw the thread?

look at that rod...such curves

Shaved &/or Laid · 02-13-2004, 02:47 PM

blah host took em down.

*pdiggitydogg* · 02-13-2004, 08:04 PM

no imagestation has been running like ass the past few weeks

02-14-2004, 10:23 PM

hey thanks for the feed back but what i was really wondering is what header and intake do I put on it. Should I get the ones for the 99-00 si or should i look at the 90-93 integra for the B16?

Shaved &/or Laid · 02-14-2004, 10:44 PM

Si is what you wanna go by just in case.

*pdiggitydogg* · 02-14-2004, 11:56 PM

it really depends on what chassis

if you have an integra get the intake for that

02-18-2004, 12:47 PM

Quote:

Originally posted by Shaved &/or Laid
Si is what you wanna go by just in case.

Or, a 94 Del Sol Vtec since it is OBD I. . . . . . .

02-11-2004, 09:53 PM	#1
tdubb528 Posts: n/a	B16 Hey I have a question. I just got a B16a1 for my 1991 Integra. I was wondering what parts should I look up to fit this engine in my car. I dont think I can do any engine mods until I know what year and model. Should i look at 99-00 civic si or 91 integra.

02-11-2004, 11:09 PM	#4
MAXed Out 6th Gear Join Date: Jan 2003 Location: Cleveland, OH Age: 38 Posts: 1,974	I think the parts should fit the car and the motor. u should of got a b18c in my opinion but it's ur ride! __________________ SHIFT_MyNuts Some people call it an obsession I just call it my maxima 1997 Maxima SE 5spd, Stillen Body Kit, Warpspeed Y & B pipes, Magnaflow Muffler, Koni Yellows & Tein S-tech springs, JVC Headunit, Directed 7" in dash screen,Stillen Intake, red/clear tail lights, AE mod, Paceseter STS, EL-Glow Gauges, Clutchmasters FX300 Clutch, rebuilt tranny, 19" Mille Miglia Evo 5's with Pirelli Pzero's(summer), 18" Hp D-10 hyper silver wrapped in Goodyear ultra HPR, SPW front strut bar, Helios 7000k HID, Motostorm UDP, Viper 5000Vx alarm, 2 12" PowerClass 124 subs, Kenwood 1200 Watt amp, DVD Changer

02-12-2004, 01:30 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	man the old school torqueless wonder. i havent heard of this motor in awhile. you deffenetly need to get motor and tranny mounts to make it fit. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-12-2004, 08:21 PM	#6
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	lets put it this way. your motor can use the stock mounts, B=B like pdiggity said. The only thing is the tranny. i have a 1st gen b16 bottom end cause i threw a rod on my SiRII. everything else is EJ1 spec (95). Cable tranny vs hydro tranny etc. DA mounts are DA mounts and should bolt on. So if you had a b18a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z in there, youll be fine. Stock - stock. __________________ Doody Ej1 Yse.

02-12-2004, 11:31 PM	#7
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 47 Posts: 2,693	You threw a rod??? __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

02-11-2004, 10:10 PM	#2
4drmadness Posts: n/a	you look up the mods normally for the model of the ride it came out of...As rule of thumb...

02-11-2004, 10:16 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	its a b series so all parts are interchangable (minus the red-headed stepchild of the b's from the preludes)

02-12-2004, 11:34 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you never saw the thread? look at that rod...such curves

02-13-2004, 02:47 PM	#9
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	blah host took em down. __________________ Doody Ej1 Yse.

02-13-2004, 08:04 PM	#10
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no imagestation has been running like ass the past few weeks

02-14-2004, 10:23 PM	#11
tdubb528 Posts: n/a	hey thanks for the feed back but what i was really wondering is what header and intake do I put on it. Should I get the ones for the 99-00 si or should i look at the 90-93 integra for the B16?

02-14-2004, 10:44 PM	#12
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	Si is what you wanna go by just in case. __________________ Doody Ej1 Yse.

02-14-2004, 11:56 PM	#13
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	it really depends on what chassis if you have an integra get the intake for that

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode