.:HSTuners::

IALuder · 12-27-2004, 06:00 AM

I bought some second hand crower rods and bolts so they came with no manufacturers specs, does anyone know what the torque setting should be? Also is it wise to use any lube on the bolts when assembling. Also does anyone thread lock theres?

*ChrisCantSkate* · 12-27-2004, 07:29 AM

i'd call up crower, they will tell you

*AzCivic* · 12-27-2004, 08:21 PM

it'd be better to go off bolt stretch rather than torque settings.

C's 94 InTeGrA · 01-01-2005, 09:24 PM

17 pound feet of torque i think is what it is. Team-integra has an article on it so it should be the same for your car

thermal · 01-01-2005, 10:37 PM

Stock should be around 20-22 ft/lbs. But you really to look at factory specs instead. Az has a great point also. Bolt stretch is something to consider about.

IALuder · 01-02-2005, 04:10 AM

i called crower and they said 19lbs is as high as i should go. so i put them at 18.

12-27-2004, 06:00 AM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	torque setting on bolts I bought some second hand crower rods and bolts so they came with no manufacturers specs, does anyone know what the torque setting should be? Also is it wise to use any lube on the bolts when assembling. Also does anyone thread lock theres? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-27-2004, 07:29 AM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	i'd call up crower, they will tell you __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

01-01-2005, 09:24 PM	#4
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	17 pound feet of torque i think is what it is. Team-integra has an article on it so it should be the same for your car __________________ 2003 Apex Silver Mitsubishi Evolution 8

01-01-2005, 10:37 PM	#5
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Stock should be around 20-22 ft/lbs. But you really to look at factory specs instead. Az has a great point also. Bolt stretch is something to consider about. __________________ Project Teg Visit the Turbo Forum

01-02-2005, 04:10 AM	#6
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	i called crower and they said 19lbs is as high as i should go. so i put them at 18. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-27-2004, 08:21 PM	#3
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	it'd be better to go off bolt stretch rather than torque settings.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode