.:HSTuners::::Hondas Wanted:: |
12-28-2002, 09:32 PM
|
#1 |
|
1st Gear
Join Date: Sep 2002
Location: Bay Area, Cali
Age: 39
Posts: 91
|
6 disc stock deck
hey guys, got a question.. how do i remove a stock 6 disc deck out of a 2002 accord coupe.... i dont want to ruin the molding around it so i want to kno a step by step.. so far i took out the 2 bottom screws, and the screw behind the clock... but it is still tuff to get out so is there ne other screws or shyt that i needa remove.. ????/
02coupev6 |
|
|
|
12-28-2002, 10:07 PM
|
#2 |
|
1st Gear
Join Date: Sep 2002
Location: Bay Area, Cali
Age: 39
Posts: 91
|
nvm, i got it out
|
|
|
|
|
12-29-2002, 09:30 PM
|
#3 |
|
Posts: n/a
|
Hey how did you get access to the screws?
I tried to remove mine, not knowing there were screws in there. Well I did ruin my front panel. How did you get those suckers out?
|
|
|
|
12-29-2002, 09:39 PM
|
#4 |
|
1st Gear
Join Date: Sep 2002
Location: Bay Area, Cali
Age: 39
Posts: 91
|
There are 2 screws on teh bottom, and 1 screw behind the clock. Take out the clock wit a flat screwdriver. Grab behind the air vents and pull it out gently wit some force. There are 5 clips, 2 on the top, 1 on each side, and 1 on the bottom. After that is removed then there are 4 screws around the deck.. remove those and ur done.. this is for the 6th generation accord.
02coupev6 |
|
|
|
|
12-29-2002, 11:57 PM
|
#5 |
|
Posts: n/a
|
Thanks
Its about the same for my Civic, except for the clock part. I finally figured that crap out.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
