.:HSTuners::

*pdiggitydogg* · 07-10-2005, 12:04 PM

Just to make a new post, how many of you all have a rattling interior door panel? What have you done to fix it?
I shoved a bunch of foam in mine, to push the panel toward the inside, but it still doesnt help.
Im going to try the expanding foam spray next

JDMFantasy2k · 07-10-2005, 12:13 PM

mine rattles as well but i think it may be the crossover for my speakers.

*ChrisCantSkate* · 07-10-2005, 12:29 PM

careful with great stuff(that expanding foam stuff) it can spiral the project into an out of control mess

Leets · 07-14-2005, 03:32 PM

I've used plenty of cans of Great Stuff. It's "Great" at quieting down the cabin from outside noise, but that rattling sounds like a bigger problem.

Try some generic dynomat stuff (cuz the name brand is a ripoff) to get rid of the resonance. Then make sure your handle and lock rods still have that stock padding around them. Also make sure none of the wire harness retaining clips are broken.

*pdiggitydogg* · 07-14-2005, 04:43 PM

No, its not from sound, it just does it because something is loose. Dynomat wont do it because its on on the frame, just the door panel.
Its not the rods, the lock, the hinges, harnesses, its the plastic panel - 100% sure...just cant find where on it

sicones · 07-16-2005, 10:00 PM

make sure all the plastic clips are securely holding on the door panel, thats all I can think of

*pdiggitydogg* · 07-17-2005, 08:21 AM

Well, its not on the outside edges, its close to the armrest/material change area...near the handle and stuff.

sicones · 07-17-2005, 02:54 PM

there are screws that hold that paticular part in to keep you from ripping off the panel when you close the door, I would use that foam stuff too, but I wouldnt go crazy with it

*pdiggitydogg* · 07-17-2005, 03:13 PM

the one in the handle/armrest, yeah
Id go play with it right now if it wasnt so damn humid

07-10-2005, 12:04 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Door panel rattles Just to make a new post, how many of you all have a rattling interior door panel? What have you done to fix it? I shoved a bunch of foam in mine, to push the panel toward the inside, but it still doesnt help. Im going to try the expanding foam spray next

07-10-2005, 12:13 PM	#2
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	mine rattles as well but i think it may be the crossover for my speakers. __________________

07-10-2005, 12:29 PM	#3
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	careful with great stuff(that expanding foam stuff) it can spiral the project into an out of control mess __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

07-14-2005, 03:32 PM	#4
Leets 2nd Gear Join Date: Feb 2003 Location: Over The Influence Posts: 158	I've used plenty of cans of Great Stuff. It's "Great" at quieting down the cabin from outside noise, but that rattling sounds like a bigger problem. Try some generic dynomat stuff (cuz the name brand is a ripoff) to get rid of the resonance. Then make sure your handle and lock rods still have that stock padding around them. Also make sure none of the wire harness retaining clips are broken. __________________ Hey, close the FAWKING door, Jackazz!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2005, 04:43 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	No, its not from sound, it just does it because something is loose. Dynomat wont do it because its on on the frame, just the door panel. Its not the rods, the lock, the hinges, harnesses, its the plastic panel - 100% sure...just cant find where on it

07-16-2005, 10:00 PM	#6
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	make sure all the plastic clips are securely holding on the door panel, thats all I can think of

07-17-2005, 08:21 AM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Well, its not on the outside edges, its close to the armrest/material change area...near the handle and stuff.

07-17-2005, 02:54 PM	#8
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	there are screws that hold that paticular part in to keep you from ripping off the panel when you close the door, I would use that foam stuff too, but I wouldnt go crazy with it

07-17-2005, 03:13 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	the one in the handle/armrest, yeah Id go play with it right now if it wasnt so damn humid