.:HSTuners::

Jayberg00 · 01-20-2006, 12:28 PM

Couple of problems 1st Code 23 knocksensor hooked up wired right, Code 17 VSS speedomoter its works fine and tech wont come in cause of these codes 90 civic Si wired right

*AzCivic* · 01-20-2006, 12:52 PM

an interesting use of the english language, it says to me "help" yet is almost completely unintelligible.

*pdiggitydogg* · 01-20-2006, 01:24 PM

Perhaps the knock sensor is faulty - have you checked it with a multimeter? Using shielded wire? Wire continuity w/ ecu? Cleaned the threads (sensor is self-grounded to the block)? Torqued correctly?

A lot of VSS issues are actually from a bad connection - clean the connector w/ brake/carb cleaner, throw on some dielectric grease, and go from there.
If it still gives you trouble, I suggest testing a different vss, and then wiring after that.

*KwikR6* · 01-20-2006, 04:09 PM

Quote:

Originally posted by AzCivic
an interesting use of the english language, it says to me "help" yet is almost completely unintelligible.

And how my friend...

01-20-2006, 12:28 PM	#1
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 39 Posts: 83	Ef-B18c1 Couple of problems 1st Code 23 knocksensor hooked up wired right, Code 17 VSS speedomoter its works fine and tech wont come in cause of these codes 90 civic Si wired right __________________ "5 Speed Imports" The New Racers, Gear Up .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-20-2006, 12:52 PM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	an interesting use of the english language, it says to me "help" yet is almost completely unintelligible.

01-20-2006, 01:24 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Perhaps the knock sensor is faulty - have you checked it with a multimeter? Using shielded wire? Wire continuity w/ ecu? Cleaned the threads (sensor is self-grounded to the block)? Torqued correctly? A lot of VSS issues are actually from a bad connection - clean the connector w/ brake/carb cleaner, throw on some dielectric grease, and go from there. If it still gives you trouble, I suggest testing a different vss, and then wiring after that.