.:HSTuners::

Si-R CRX · 02-06-2006, 11:25 PM

I am looking to replace most of my top end because I have a bad tick and its no the normal Honda noise. I have been looking a a lot of different sets from Skunk2 to Toda. I am leaning towards Skunk2 because of price but i would like some opinions. Just to clarify set meaning valves, retainers @ springs. I am also going to upgrade to cams when I get the cash but I am worried about the tick at the moment.

*pdiggitydogg* · 02-07-2006, 01:13 PM

I just dont like anything skunk2 makes...well besides their shifter, but thats hard to screw up (it was their uca's and their warranty policy that did it for me).
Toda is pretty baller status, but they make good parts, cant argue with that.
Persoanlly, Im using crowers.

Maybe you just really need a valve adjustment?

Si-R CRX · 02-07-2006, 02:36 PM

Quote:

[i]

Maybe you just really need a valve adjustment? [/b]

Nah Ive done that. It didnt fix it. I dont know what it could be. It is coming from the right hand side near the cam gears but its not coming from the cam gears.

thermal · 02-08-2006, 12:08 AM

Ferea. Decent price but it works. Not a fan of Skunk2 myself. Toda is too much $$$. I'm actually looking into some custom stuff from a shop in NC.

Si-R CRX · 02-08-2006, 06:48 AM

Quote:

Originally posted by thermal
Ferea. Decent price but it works. Not a fan of Skunk2 myself. Toda is too much $$$. I'm actually looking into some custom stuff from a shop in NC.

Where @ in NC. Thats where im at.

GT40FIED · 02-08-2006, 09:34 AM

Ferrea makes some good stuff. I was in contact with them long ago (and by long ago, I mean about 6 or 7 years) to do some valve work on my heads. They seemed to really know their shit. I don't know much about their business now, but I can only assume it's grown with the same quality of work. Props to Arnel for reminding me of that company.

silver · 02-08-2006, 07:27 PM

what cams are you going to go with? that would be my deciding factor in the choice of valvetrain. i just unloaded a lot of buddy club parts and i have been impressed with their quality. the price is tough to beat as well. There is no reason to upgrade your valvetrain if you are not planning on changing to a higher lift cam or revving your motor to higher then stock rpms. if you don't want to change that, then you can never go wrong with oem.

thermal · 02-08-2006, 09:20 PM

Quote:

Originally posted by Si-R CRX
Where @ in NC. Thats where im at.

RLZ Engineering specializes on Honda motors and has been one of the best in market on head work.

Contact:

http://www.hondaraceengines.com/

02-06-2006, 11:25 PM	#1
Si-R CRX Registered User Join Date: Dec 2005 Location: NC Age: 42 Posts: 101	Valves, Springs & Retainers I am looking to replace most of my top end because I have a bad tick and its no the normal Honda noise. I have been looking a a lot of different sets from Skunk2 to Toda. I am leaning towards Skunk2 because of price but i would like some opinions. Just to clarify set meaning valves, retainers @ springs. I am also going to upgrade to cams when I get the cash but I am worried about the tick at the moment. __________________

02-08-2006, 12:08 AM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Ferea. Decent price but it works. Not a fan of Skunk2 myself. Toda is too much $$$. I'm actually looking into some custom stuff from a shop in NC. __________________ Project Teg Visit the Turbo Forum

02-08-2006, 09:34 AM	#6
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Ferrea makes some good stuff. I was in contact with them long ago (and by long ago, I mean about 6 or 7 years) to do some valve work on my heads. They seemed to really know their shit. I don't know much about their business now, but I can only assume it's grown with the same quality of work. Props to Arnel for reminding me of that company. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

02-08-2006, 07:27 PM	#7
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 43 Posts: 820	what cams are you going to go with? that would be my deciding factor in the choice of valvetrain. i just unloaded a lot of buddy club parts and i have been impressed with their quality. the price is tough to beat as well. There is no reason to upgrade your valvetrain if you are not planning on changing to a higher lift cam or revving your motor to higher then stock rpms. if you don't want to change that, then you can never go wrong with oem. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-07-2006, 01:13 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	I just dont like anything skunk2 makes...well besides their shifter, but thats hard to screw up (it was their uca's and their warranty policy that did it for me). Toda is pretty baller status, but they make good parts, cant argue with that. Persoanlly, Im using crowers. Maybe you just really need a valve adjustment?