.:HSTuners::

pimpinprelude · 11-16-2004, 05:14 AM

i just got a 85 gsl-se and i put a AEM cai on it. It fit and every thing, but what do i do with the air flow censor?

question#2 there is a rubber hose that went into the old intake, comming off of the smog pump i beleave, what do i do with this??? plug it?? leave it open??

question#3 can i take the belt off the smog pump so its not spinning??

question#4 does the heater work off the same pump as the ac compressor?? i would like to take the belt off that also.

thanks for any help!!
patrick

GT40FIED · 11-16-2004, 06:33 AM

I would try to relocate the sensor to it's stock position...or close to it. Moving it too much can't be good. As for the tube, if you absolutely can't maintain it on the intake, I'd plug it. The belt on the smog pump isn't going to rob you of any serious horsepower, but if you want to take it off I suppose that's an option. As for the heater, it shouldn't have anything to do with the A/C. The heater should have inlet/outlet hoses from the radiator to the heater core and use it's own seperate blower fan for heat. But then again...what do I know about RX-7s?

IALuder · 11-16-2004, 07:34 AM

^try a RX-7 forum. i have no clue.

11-16-2004, 05:14 AM	#1
pimpinprelude Registered User Join Date: Mar 2003 Location: Atlanta Age: 37 Posts: 1,325	need some rx-7 help! i just got a 85 gsl-se and i put a AEM cai on it. It fit and every thing, but what do i do with the air flow censor? question#2 there is a rubber hose that went into the old intake, comming off of the smog pump i beleave, what do i do with this??? plug it?? leave it open?? question#3 can i take the belt off the smog pump so its not spinning?? question#4 does the heater work off the same pump as the ac compressor?? i would like to take the belt off that also. thanks for any help!! patrick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-16-2004, 06:33 AM	#2
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	I would try to relocate the sensor to it's stock position...or close to it. Moving it too much can't be good. As for the tube, if you absolutely can't maintain it on the intake, I'd plug it. The belt on the smog pump isn't going to rob you of any serious horsepower, but if you want to take it off I suppose that's an option. As for the heater, it shouldn't have anything to do with the A/C. The heater should have inlet/outlet hoses from the radiator to the heater core and use it's own seperate blower fan for heat. But then again...what do I know about RX-7s? __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

11-16-2004, 07:34 AM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	^try a RX-7 forum. i have no clue. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.