.:HSTuners::

IALuder · 06-12-2004, 03:04 PM

well guys im going to buy a doner car to fix up mine. but at the same time while i got the motor out im going to build the internals up to hold 15LBS of boost.

my question is what internals would you recommend?

for what kit am i buying: the Greddy Turbo kit for a 97-01. the thing is i have to buy a Hondata or a 97-01 ECU for the turbo to run properally. i will also have to custom fit the down pipe.

but i also may buy a 98+motor...H22a4. so i wont need to deal with the ecu.

06-12-2004, 07:11 PM

HONDATA!!! don't settle for other shit. the Hondata will do the best and be the most reliable. Get It. Even if your getting that 98+ motor get the Hondata.

thermal · 06-15-2004, 08:42 PM

Well, it just really depends on what you want to do man... i say stay away from that tiny ass GReddy turbo and get something bigger. A compression of 9.5:1 to 10:1 is great on the streets, as long as the rods are stronger. A flat top piston proved to be better choices with all my friends, but some people may disagree. I'm excited for you man!

IALuder · 06-16-2004, 08:06 AM

thanks.. with working 2 jobs im making enough cash to get more things done at once! i was thinking of buying the OverBoost kit. Stage 2 for a H22a1. i heard that the H22a4 have some really ghey perks to them. so ill stay away from them. the extra 5 hp isnt worth a dime to me.

i have also chosin the hondata system. im just not sure were to get mine at. i also need to get gauges. cheap places??

thermal · 06-16-2004, 09:38 PM

Shit bro, I say look into a Full-Race kit......

www.full-race.com

Sivik · 06-16-2004, 09:49 PM

fulle race = bad ass!

if you want 15 psi, Greddy turbo will be maxed out so i would stay away from that. i'd go with a t3/t4 or and sc34 turbo. compression id go with no more than 9.5:1 and no less than 8:1. As far as brands:

Pistons - CP or JE
Rods - Eagle
ARP head studs and rod bolts

Then there is little things to - micropolish crank, balance rotating assembly, balance piston/rods, cylinder wall honing, port and polish, etc. the list goes on.

hondata = A++++++

what car is the motor going in? im not a big fan of the H22. its not worth the trouble to get it to fit in an EG/EK chassis.

Gauges - Autometer, Greddy, HKS, Blitz, Defi. Boost necessary! any other ones are personal preference.
for 15 lbs, piston and rods should be fine as far as replacement. but if your going do it do it right. take your time and be ready to spend the cash

.

IALuder · 06-16-2004, 10:53 PM

Full-Race doesnt make a kit for my car yet....

its going in my 95 Prelude. im going with JE pistons. now what turbo cam is good?

Sivik · 06-17-2004, 01:58 AM

i take it your still talking about the h22 motor since its going in your prelude. as far as cams, ive heard from many people that the stock cams are the best for turbo applications.

IALuder · 06-17-2004, 02:22 PM

yup..h22a1..92-96.

stock cams..im not sure.

thermal · 06-19-2004, 02:45 AM

I would go bigger tho. That 2.2 will be great on spooling up an SC61 or 60-1. i already want to upgrade my turbo to one of those.... ha ha

True... they dont make a kit for H-series yet. But they do have the manifold.....

IALuder · 06-19-2004, 05:43 PM

well...but the time i actually get around to getting the turbo on maybe the kit will be aviable.

06-12-2004, 03:04 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	Boosting my ride well guys im going to buy a doner car to fix up mine. but at the same time while i got the motor out im going to build the internals up to hold 15LBS of boost. my question is what internals would you recommend? for what kit am i buying: the Greddy Turbo kit for a 97-01. the thing is i have to buy a Hondata or a 97-01 ECU for the turbo to run properally. i will also have to custom fit the down pipe. but i also may buy a 98+motor...H22a4. so i wont need to deal with the ecu.

06-15-2004, 08:42 PM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Well, it just really depends on what you want to do man... i say stay away from that tiny ass GReddy turbo and get something bigger. A compression of 9.5:1 to 10:1 is great on the streets, as long as the rods are stronger. A flat top piston proved to be better choices with all my friends, but some people may disagree. I'm excited for you man! __________________ Project Teg Visit the Turbo Forum

06-16-2004, 08:06 AM	#4
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	thanks.. with working 2 jobs im making enough cash to get more things done at once! i was thinking of buying the OverBoost kit. Stage 2 for a H22a1. i heard that the H22a4 have some really ghey perks to them. so ill stay away from them. the extra 5 hp isnt worth a dime to me. i have also chosin the hondata system. im just not sure were to get mine at. i also need to get gauges. cheap places?? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-16-2004, 09:38 PM	#5
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Shit bro, I say look into a Full-Race kit...... www.full-race.com __________________ Project Teg Visit the Turbo Forum

06-16-2004, 09:49 PM	#6
Sivik Registered User Join Date: Jan 2002 Location: Gainesville, FL Posts: 331	fulle race = bad ass! if you want 15 psi, Greddy turbo will be maxed out so i would stay away from that. i'd go with a t3/t4 or and sc34 turbo. compression id go with no more than 9.5:1 and no less than 8:1. As far as brands: Pistons - CP or JE Rods - Eagle ARP head studs and rod bolts Then there is little things to - micropolish crank, balance rotating assembly, balance piston/rods, cylinder wall honing, port and polish, etc. the list goes on. hondata = A++++++ what car is the motor going in? im not a big fan of the H22. its not worth the trouble to get it to fit in an EG/EK chassis. Gauges - Autometer, Greddy, HKS, Blitz, Defi. Boost necessary! any other ones are personal preference. for 15 lbs, piston and rods should be fine as far as replacement. but if your going do it do it right. take your time and be ready to spend the cash . __________________ Turbo'd 98 Honda Civic EX My Car My Car is for sale

06-12-2004, 07:11 PM	#2
Mirkwo0dForest Posts: n/a	HONDATA!!! don't settle for other shit. the Hondata will do the best and be the most reliable. Get It. Even if your getting that 98+ motor get the Hondata.

06-16-2004, 10:53 PM	#7
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	Full-Race doesnt make a kit for my car yet.... its going in my 95 Prelude. im going with JE pistons. now what turbo cam is good? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-17-2004, 01:58 AM	#8
Sivik Registered User Join Date: Jan 2002 Location: Gainesville, FL Posts: 331	i take it your still talking about the h22 motor since its going in your prelude. as far as cams, ive heard from many people that the stock cams are the best for turbo applications. __________________ Turbo'd 98 Honda Civic EX My Car My Car is for sale

06-17-2004, 02:22 PM	#9
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	yup..h22a1..92-96. stock cams..im not sure. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-19-2004, 02:45 AM	#10
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I would go bigger tho. That 2.2 will be great on spooling up an SC61 or 60-1. i already want to upgrade my turbo to one of those.... ha ha True... they dont make a kit for H-series yet. But they do have the manifold..... __________________ Project Teg Visit the Turbo Forum

06-19-2004, 05:43 PM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well...but the time i actually get around to getting the turbo on maybe the kit will be aviable. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode