.:HSTuners::::Hondas Wanted:: |
06-28-2004, 08:38 AM | #1 |
1st Gear
Join Date: Apr 2003
Location: Patton, PA
Age: 40
Posts: 57
|
Steering Wheel
Well I was thinking about sticking an aftermarket steering wheel in me car to match the interior. Is there anything I will need besides the steering wheel? Also I have heard that if you have a steering wheel with an air bag in it you can't install an after market one. Any info would help thanks.
__________________
Mods on Car include: --------------------------- Halo lights - Altezza taillights Clear bumper - Corner - Side lights Mesh grill Air intake - Obx b5 bomb muffler powertech headers Alpine head deck Audiobahn Subs/amps/speakers race pedals - Inside neons short shifter -glo guages front and rear strut bars (APC) Full custom painted interior back seat reupholstered in vinly Ground Control coilovers tokico HP struts Stage 2 racing clutch APC Race seats Mugen racing harnesses AeroSpeed quick clutch |
07-04-2004, 06:49 PM | #2 |
Posts: n/a
|
well you will have to get a steering wheel hub, sparco and momo make them for Accords, as for SRS, you will have to remove both front airbags otherwise your SRS LIGHT on your gauge cluster will stay on. Hope this helps. What year is your accord?
|
07-07-2004, 10:09 AM | #3 |
1st Gear
Join Date: Apr 2003
Location: Patton, PA
Age: 40
Posts: 57
|
Its a 94
Do you know of any prices? Will my car still pass inspection with out the air bags?
__________________
Mods on Car include: --------------------------- Halo lights - Altezza taillights Clear bumper - Corner - Side lights Mesh grill Air intake - Obx b5 bomb muffler powertech headers Alpine head deck Audiobahn Subs/amps/speakers race pedals - Inside neons short shifter -glo guages front and rear strut bars (APC) Full custom painted interior back seat reupholstered in vinly Ground Control coilovers tokico HP struts Stage 2 racing clutch APC Race seats Mugen racing harnesses AeroSpeed quick clutch |
07-07-2004, 10:29 AM | #4 |
Posts: n/a
|
hub should run you about 50.00 , the sterring all depends on what kind you want anywhere from 200-350.00 sparco, momo, mugen etc....as for the inspection im not really sure, may want to ask the dmv in your area
|
Thread Tools | |
Display Modes | |
|
|