.:HSTuners::

Si-R CRX · 01-26-2006, 09:41 PM

Does anyone know the actual numbers that a LS/Vtec will put out. I know there are a million diffrent things such as intake exhaust....etc etc. I am just wondering if stock you put a b16 head on a b18 block what would it put out?? The reason I ask I am thinking about doing it and am just wondering about the hp/tq.

*pdiggitydogg* · 01-26-2006, 10:31 PM

we need MissJDM for that
Where are you LYNA!?!?

JDMFantasy2k · 01-27-2006, 10:30 AM

yeah where the hell has she been lately? i know she was building a nice little set up

i think it can vary anywhere from 170-190HP, but like you said there's so many variables, (intake, header, tuning etc)

*pdiggitydogg* · 01-27-2006, 11:09 AM

I really dont know if she decided to keep it or not....

I think Steve talks to her regularly. Any input?

IALuder · 01-27-2006, 03:27 PM

lsvtec makes around 160-170- but high tq. thats the purpose of the hybrid is tq instead of hp number.

GT40FIED · 01-27-2006, 05:50 PM

Quote:

Originally posted by pdiggitydogg
I really dont know if she decided to keep it or not....

I think Steve talks to her regularly. Any input?

Yeah, actually. Man...I can't believe how hard I rule.

Last I heard she was having some wicked bad computer problems. She wanted me to help her fix the bitch, but I haven't heard from her in about a week...so who knows? Next time I talk to her I'll ask her and post it back up here if she can't get on to do it herself.

Si-R CRX · 01-27-2006, 06:06 PM

So if I put pistons, skunk2 pro series intake, full greddy exhaust, chipped ecu, and bore it to 81.5 you think it would put out about 180ish hp and 140ish tq????

IALuder · 01-27-2006, 08:14 PM

might. i would assume you would come close.

*pdiggitydogg* · 01-27-2006, 08:15 PM

Honestly, I think it would be closer to 160 and 140, maybe more with ctr pistons

JDMFantasy2k · 01-27-2006, 09:41 PM

depends on how high you rev it too

IALuder · 01-27-2006, 10:09 PM

and depending on how high you decide to rev get some oil squirters.

Si-R CRX · 01-27-2006, 10:15 PM

Quote:

Originally posted by pdiggitydogg
Honestly, I think it would be closer to 160 and 140, maybe more with ctr pistons

Even since to b16a has 160 stock? I know the tq will go up a good bit but why wouldnt the hp? I mean after boring it to a 1.85 lt the hp has got to do something. I am also going to run higher compression pistons.

IALuder · 01-27-2006, 10:33 PM

ok running higher comp will help.

but the head makes the hp, not the block.

*AzCivic* · 01-28-2006, 01:23 PM

torque is gonna be similiar to a regular ls engine, with a slight bump due to the increase in compression. unless you increase the displacement.

*pdiggitydogg* · 02-04-2006, 11:26 PM

Never concern yourself with what an engine is stock, because those are engine hp numbers...whereas you will be working with wheel hp numbers during your build.
A b16 makes closer to 135whp, not 160.

Forget about squirters too, just use aftermarket pistons. As long as you dont take it over 9K, you'll be fine. LS cranks are brutes, and if youre messing with pistons, dont leave the stock rods either...thats just silly imo

.5mm oversize isnt meant to be a displacement increase, it is used when the cylinder walls are scratched during rebuilds - it wont net you any power.
Were you looking at ctr pistons/similar or more dome? If youre contemplating boost still, forget anything that will increase compression! Look at flat top pistons instead (wiseco is best for the money) and should give you ~9.5:1 with a b16 head

thermal · 02-08-2006, 12:24 AM

^yep. Back in 2000, we dynoed an Si fresh off the lot and only made 135whp. An LSVTEC can make between 140-180whp depending on piston set-up and head choice. The magic set is the B16A and CTR pistons yielding almost 12:1 compression with adequate torque.

Pat, those gauges looks sick on your dash!

*pdiggitydogg* · 02-08-2006, 07:59 PM

thanks!

Really, Im surprised it was so close to the 15% loss...I guess that number is used for a reason

01-26-2006, 09:41 PM	#1
Si-R CRX Registered User Join Date: Dec 2005 Location: NC Age: 42 Posts: 101	LS/Vtec Power & Torque Does anyone know the actual numbers that a LS/Vtec will put out. I know there are a million diffrent things such as intake exhaust....etc etc. I am just wondering if stock you put a b16 head on a b18 block what would it put out?? The reason I ask I am thinking about doing it and am just wondering about the hp/tq. __________________

01-27-2006, 10:30 AM	#3
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	yeah where the hell has she been lately? i know she was building a nice little set up i think it can vary anywhere from 170-190HP, but like you said there's so many variables, (intake, header, tuning etc) __________________

01-27-2006, 03:27 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	lsvtec makes around 160-170- but high tq. thats the purpose of the hybrid is tq instead of hp number. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-27-2006, 06:06 PM	#7
Si-R CRX Registered User Join Date: Dec 2005 Location: NC Age: 42 Posts: 101	So if I put pistons, skunk2 pro series intake, full greddy exhaust, chipped ecu, and bore it to 81.5 you think it would put out about 180ish hp and 140ish tq???? __________________

01-27-2006, 08:14 PM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	might. i would assume you would come close. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-26-2006, 10:31 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	we need MissJDM for that Where are you LYNA!?!?

01-27-2006, 11:09 AM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	I really dont know if she decided to keep it or not.... I think Steve talks to her regularly. Any input?

01-27-2006, 08:15 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Honestly, I think it would be closer to 160 and 140, maybe more with ctr pistons

01-27-2006, 09:41 PM	#10
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	depends on how high you rev it too __________________

01-27-2006, 10:09 PM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	and depending on how high you decide to rev get some oil squirters. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-27-2006, 10:33 PM	#13
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	ok running higher comp will help. but the head makes the hp, not the block. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-28-2006, 01:23 PM	#14
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	torque is gonna be similiar to a regular ls engine, with a slight bump due to the increase in compression. unless you increase the displacement.

02-04-2006, 11:26 PM	#15
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Never concern yourself with what an engine is stock, because those are engine hp numbers...whereas you will be working with wheel hp numbers during your build. A b16 makes closer to 135whp, not 160. Forget about squirters too, just use aftermarket pistons. As long as you dont take it over 9K, you'll be fine. LS cranks are brutes, and if youre messing with pistons, dont leave the stock rods either...thats just silly imo .5mm oversize isnt meant to be a displacement increase, it is used when the cylinder walls are scratched during rebuilds - it wont net you any power. Were you looking at ctr pistons/similar or more dome? If youre contemplating boost still, forget anything that will increase compression! Look at flat top pistons instead (wiseco is best for the money) and should give you ~9.5:1 with a b16 head

02-08-2006, 12:24 AM	#16
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	^yep. Back in 2000, we dynoed an Si fresh off the lot and only made 135whp. An LSVTEC can make between 140-180whp depending on piston set-up and head choice. The magic set is the B16A and CTR pistons yielding almost 12:1 compression with adequate torque. Pat, those gauges looks sick on your dash! __________________ Project Teg Visit the Turbo Forum

02-08-2006, 07:59 PM	#17
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	thanks! Really, Im surprised it was so close to the 15% loss...I guess that number is used for a reason

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode