.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Hybrid
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 01-16-2003, 07:46 PM   #1
91AccordLX
 
Posts: n/a
H22 swap question!

Hello everyone,
I was checking the possibilities of swapping an H22 engine into my 91 Accord LX, when today I found a local junkyard that has a 97 USDM H22 engine with only 20k!! miles for $1700, did I mention it only has 20k miles!?... but the only thing is that it's for engine only. No transmission, etc. They said it was a long block, aren't all H22s long blocks? or are there different types?
Anyway, I wanted to know which other parts would be needed to put the engine in? IE: which OBD/ECU, sensors (assuming they're bad/broken),etc, and if I can use the Accord parts like for sensors and mounts or will I need new ones? and how much would those parts cost. I know this is a really good price for an H22, especially a 97 USDM and with only 20k miles.. so I'm really anxious to know how much else I would have to spend to get this engine only working. I know all this has been answered in all the other posts, but I need a quick, concise answer as soon as possible so I'll know if I should go buy the engine before it's gone. Thanks!
  Reply With Quote
Old 01-16-2003, 07:51 PM   #2
silver
Registered User
 
silver's Avatar
 
Join Date: Dec 2002
Location: so cali again
Age: 43
Posts: 820
Re: H22 swap question!

Quote:
Originally posted by 91AccordLX
Hello everyone,
I was checking the possibilities of swapping an H22 engine into my 91 Accord LX, when today I found a local junkyard that has a 97 USDM H22 engine with only 20k!! miles for $1700, did I mention it only has 20k miles!?... but the only thing is that it's for engine only. No transmission, etc. They said it was a long block, aren't all H22s long blocks? or are there different types?
Anyway, I wanted to know which other parts would be needed to put the engine in? IE: which OBD/ECU, sensors (assuming they're bad/broken),etc, and if I can use the Accord parts like for sensors and mounts or will I need new ones? and how much would those parts cost. I know this is a really good price for an H22, especially a 97 USDM and with only 20k miles.. so I'm really anxious to know how much else I would have to spend to get this engine only working. I know all this has been answered in all the other posts, but I need a quick, concise answer as soon as possible so I'll know if I should go buy the engine before it's gone. Thanks!


first off i can get an h22 w/tranny around that price. You will need to buy mounts. You will need to buy a tranny. Is the wiring harness cut? I say you forget it and get one that has everything ready so you aren't buying every individual part to put it together.
__________________
Distributor of proven performance products from top manufacturers such as:
Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach.

http://www.bulletproofautomotive.com
silver is offline   Reply With Quote
Old 01-17-2003, 02:33 PM   #3
slowEJ6
Registered User
 
slowEJ6's Avatar
 
Join Date: Nov 2001
Location: Oviedo, FL
Age: 42
Posts: 3,195
isnt a 91 Accord OBD0? 97 H22A is OBD2.
i dont know about the swap at all, im just wondering how much of a pain in the ass its going to be to do the swap - if any.
slowEJ6 is offline   Reply With Quote
Old 01-17-2003, 03:15 PM   #4
91AccordLX
 
Posts: n/a
I thought all 90-93 4th gen Accords were OBD1?? and supposed to be the easiest to swap an H22A into? I'm going to try to go and see the engine for myself this weekend to see if the wires are cut and what condition the engine is in.. I don't want to pieice together everything if it's just going to cost the same as a complete swap "kit".
  Reply With Quote
Old 01-17-2003, 03:37 PM   #5
94_AcCoRd_EX
Insomniac Moderator
 
94_AcCoRd_EX's Avatar
 
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
Quote:
Originally posted by 91AccordLX
I thought all 90-93 4th gen Accords were OBD1??

Either way, the engine you found is OBDII. This presents problems, as I believe there is an extra O2 sensor? and also different wiring to go to it, etc. I don't know the details though.
__________________
1994 Accord EX coupe

--Need hosting for your pics on HST? PM me...--
94_AcCoRd_EX is offline   Reply With Quote
Old 01-17-2003, 04:01 PM   #6
ChrisCantSkate
Thought Police
 
ChrisCantSkate's Avatar
 
Join Date: Aug 2001
Location: orlando florida
Age: 40
Posts: 9,662
well.. it can be done.. the block and head can be used. the obd2 uses a different computer, and wiring harness, but essentialy the same motor can be used. you CAN use your tranny, but you'd need an obd1 p13 ecu, and you would have to hardwire the vtec soiliniod. you wouldnt need mounts, but for 2000 you can get a full sway using a correct tranny, get the ecu and axles with it. walk away from this. its not really worth it
__________________
Black Vtec Prelude-h22a power'd



Many dreams come true, and some have silver linings.
I live for my dreams and a pocket full of gold.
ChrisCantSkate is offline   Reply With Quote
Old 01-17-2003, 04:03 PM   #7
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
Longblock-complete engine: bottom end + head
Shortblock-just the bottom end
Complete swap-engine, harness, ecu, tranny.

as for the engine will drop right in, no motor mounts required. the painful part is gonna be adapting the harness from obd2 to odb1. and not all the 90-93 accords are obd1. 90 is pre-obd
__________________


ebpda9 is offline   Reply With Quote
Old 01-17-2003, 04:25 PM   #8
91AccordLX
 
Posts: n/a
Quote:
walk away from this. its not really worth it

Damn, if only it was a full swap. Especially since I live in California, a USDM H22 with only 20k miles would have been perfect for smogging. Guess I'll go back to looking to turbo my F22 instead
  Reply With Quote
Old 01-17-2003, 04:47 PM   #9
ChrisCantSkate
Thought Police
 
ChrisCantSkate's Avatar
 
Join Date: Aug 2001
Location: orlando florida
Age: 40
Posts: 9,662
Quote:
Originally posted by hondaman-iac
Longblock-complete engine: bottom end + head
Shortblock-just the bottom end
Complete swap-engine, harness, ecu, tranny.

as for the engine will drop right in, no motor mounts required. the painful part is gonna be adapting the harness from obd2 to odb1. and not all the 90-93 accords are obd1. 90 is pre-obd

he can use his stock harness for the most part. he will need to run the vtec soiliniod wire, i think thats it. OBD2 is in the computer, not the engine. the extra sensors are in the cat. he might need to add a knock sensor if the f22 dosnt have it.
__________________
Black Vtec Prelude-h22a power'd



Many dreams come true, and some have silver linings.
I live for my dreams and a pocket full of gold.
ChrisCantSkate is offline   Reply With Quote
Old 01-29-2006, 07:24 AM   #10
skyline18
Parked
 
Join Date: Jan 2006
Location: tx
Age: 38
Posts: 2
sorry for raising the dead here but i have a similar question. hows 1250 sound for the engine, I gotta check the miles on it but i know no matter what its not even half what i have on my f22a1 right now. And about this OBDI and II thing. The 91 has a I and the prelude 97 has II what exactly am i doing to trick it here am i just using the prelude ecu or am i having to change so more things?
__________________
If you mess with the power of the H22, when im through youll need alot more than soap to wash out that booboo
skyline18 is offline   Reply With Quote
Old 01-29-2006, 10:58 AM   #11
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
you could run a 92-95 prelude ecu, or if you could find a gsr ecu.
__________________


ebpda9 is offline   Reply With Quote
Old 01-30-2006, 05:49 AM   #12
skyline18
Parked
 
Join Date: Jan 2006
Location: tx
Age: 38
Posts: 2
so all i have to do is get the engine and add ons and then just get a different ecu? because that would be great.
__________________
If you mess with the power of the H22, when im through youll need alot more than soap to wash out that booboo
skyline18 is offline   Reply With Quote
Old 03-23-2021, 10:51 PM   #13
topsocial
Registered User
 
Join Date: Mar 2021
Posts: 5
There was once a blind man who had so fine a sense of touch that, when any animal was put into his hands, he could tell what it was merely by the feel of it. One day the cub of a wolf was put into his hands, and he was asked what it was. He felt it for some time, and then said, "Indeed, I am not sure whether it is a wolf's cub or a fox's: but this I know -- it would never do to trust it in a sheepfold."
Evil tendencies are early shown.
__________________
website seo
topsocial is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:49 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com