.:HSTuners::

Jayberg00 · 11-16-2004, 07:04 PM

I finally got My JDM B16A motor and wanted to know how to wire it for vtec i know it is three wires oil pressure vtec acttivation and knock sensor where should i run them to the ECU yes but how and what wire should i hooked them 2.

*pdiggitydogg* · 11-17-2004, 12:21 AM

you run them directly from the points to the ecu

you can open the end-harness up and drop the wires in for connection @ the ecu

11-16-2004, 07:04 PM	#1
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 39 Posts: 83	90 Si Wiring I finally got My JDM B16A motor and wanted to know how to wire it for vtec i know it is three wires oil pressure vtec acttivation and knock sensor where should i run them to the ECU yes but how and what wire should i hooked them 2. __________________ "5 Speed Imports" The New Racers, Gear Up .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-17-2004, 12:21 AM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you run them directly from the points to the ecu you can open the end-harness up and drop the wires in for connection @ the ecu