.:HSTuners::

C's 94 InTeGrA · 03-14-2004, 09:22 PM

well i should be gettin my new exhaust here in 2 days and was wondering if i should do it myself or have a shop do it. I aleady have the axelback off. Just the midsection is it. I see that 2 of the hangers on my teg are welded on so i wouldnt be able to get those off myself. MY question is would i have to weld those back on to my new exhaust so it doesnt come loose?

ebpda9 · 03-14-2004, 10:29 PM

get your exhaust up to cleveland and we'll install it

i'll charge you $1 for it

*pdiggitydogg* · 03-14-2004, 10:40 PM

very easy to do
just remember to spray the hangers w/ lube so they come off easier

C's 94 InTeGrA · 03-14-2004, 11:06 PM

lol Stefan... i wish i could man.. but my car isnt fit to drive up therre right now... Well we got some problems right now. The bolts holding the pipe to the cat are sooooooooo rusted and will not move... i tried everything.. i even sprayed them with pb blaster too. Also a funny thing. Someone maybe the dealer when they put a new cat and exhaust on my car brike the bolt holding my cat up to the header collector.. so ya. I am thinking of taking it to a muffler shop.

*KwikR6* · 03-14-2004, 11:57 PM

Do it yourself.
Grind off the stubborn bolts and go buy new ones.
Trust me..there is a satisfaction of doing things yourself..

*ChrisCantSkate* · 03-15-2004, 12:28 AM

your new exaust will come with hangers. very simple... 3 rubber thingys holding it up then its off

C's 94 InTeGrA · 03-15-2004, 08:50 AM

ya i found out it comes with new hangers. Do u think it would come with new bolts as well? Well ya i am just about done messin with gettin the old one off so ill end up taking it somewhere.

MAXed Out · 03-15-2004, 03:14 PM

Just get a grinder and cut those rusted bolts off. Then just get the old exhaust off and put this one in.

94_AcCoRd_EX · 03-15-2004, 03:17 PM

It probably won't come with new bolts, but if you have an auto/hardware store near you that shouldn't be a problem, right?

Do you have a grinder that you can use? That should make the job much easier...

C's 94 InTeGrA · 03-15-2004, 03:22 PM

i think i do... but really.. i dont wana full with the whole thing. everytime i try to do somethin on my car i always fuck somethin up. i got quoted 35-40$ today from a shop here depending on how hard it is to put on. and i was like its a bolt on and hes like well they say that but it sometimes isnt the case... real jackass there. but anyhow.

B16DoHcCrx033003 · 03-15-2004, 03:25 PM

gring off the bolt heads, and get some easy outs.. they work no matter what....

*KwikR6* · 03-15-2004, 11:18 PM

Why don't you take it to a shop...and ask them to do it...and ask them to show you how to do it...say you really want to learn.

blind34_1 · 03-16-2004, 01:30 PM

http://www.4gcivichowto.0catch.com

theres the site I made to show how "hard" it was to do my own catback. I basically took two days because I didn't plan ahead. I had the same problem you have with the cat being fused to the old pipe. I wasted so much time trying to hacksaw those bolts (If I had a dremel at the time, that might have done it), when I justed ended up taking it to my dads friend and he torched the bolts out. after that it was complete bolt up, easy as pie.

Mine came with some hardware, although I had to buy a few extra gaskets and one bolt. oh and also, make sure you put the midpipe in RIGHT SIDE UP! for a week I couldn't figure out why it was scraping on every bump!

just do it yourself, you'll feel great about it!

C's 94 InTeGrA · 03-16-2004, 05:06 PM

well i got it on wit hthe muffler shop.. i hated having to drive my car in all this snow shit. But i got it on. they charged me really cheap and it sounds very badass... thanks guys for ur help

Shaved &/or Laid · 03-16-2004, 05:06 PM

oh come on its so easy to get those bolts off. ive had to do it like 5-10 times, and again today.

03-14-2004, 09:22 PM	#1
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	Hard to put a cat-back exhaust on myself? well i should be gettin my new exhaust here in 2 days and was wondering if i should do it myself or have a shop do it. I aleady have the axelback off. Just the midsection is it. I see that 2 of the hangers on my teg are welded on so i wouldnt be able to get those off myself. MY question is would i have to weld those back on to my new exhaust so it doesnt come loose? __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-14-2004, 10:29 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	get your exhaust up to cleveland and we'll install it i'll charge you $1 for it __________________

03-14-2004, 11:06 PM	#4
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	lol Stefan... i wish i could man.. but my car isnt fit to drive up therre right now... Well we got some problems right now. The bolts holding the pipe to the cat are sooooooooo rusted and will not move... i tried everything.. i even sprayed them with pb blaster too. Also a funny thing. Someone maybe the dealer when they put a new cat and exhaust on my car brike the bolt holding my cat up to the header collector.. so ya. I am thinking of taking it to a muffler shop. __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-14-2004, 11:57 PM	#5
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Do it yourself. Grind off the stubborn bolts and go buy new ones. Trust me..there is a satisfaction of doing things yourself.. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

03-15-2004, 12:28 AM	#6
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	your new exaust will come with hangers. very simple... 3 rubber thingys holding it up then its off __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

03-14-2004, 10:40 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	very easy to do just remember to spray the hangers w/ lube so they come off easier

03-15-2004, 08:50 AM	#7
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	ya i found out it comes with new hangers. Do u think it would come with new bolts as well? Well ya i am just about done messin with gettin the old one off so ill end up taking it somewhere. __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-15-2004, 03:14 PM	#8
MAXed Out 6th Gear Join Date: Jan 2003 Location: Cleveland, OH Age: 38 Posts: 1,974	Just get a grinder and cut those rusted bolts off. Then just get the old exhaust off and put this one in. __________________ SHIFT_MyNuts Some people call it an obsession I just call it my maxima 1997 Maxima SE 5spd, Stillen Body Kit, Warpspeed Y & B pipes, Magnaflow Muffler, Koni Yellows & Tein S-tech springs, JVC Headunit, Directed 7" in dash screen,Stillen Intake, red/clear tail lights, AE mod, Paceseter STS, EL-Glow Gauges, Clutchmasters FX300 Clutch, rebuilt tranny, 19" Mille Miglia Evo 5's with Pirelli Pzero's(summer), 18" Hp D-10 hyper silver wrapped in Goodyear ultra HPR, SPW front strut bar, Helios 7000k HID, Motostorm UDP, Viper 5000Vx alarm, 2 12" PowerClass 124 subs, Kenwood 1200 Watt amp, DVD Changer

03-15-2004, 03:17 PM	#9
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	It probably won't come with new bolts, but if you have an auto/hardware store near you that shouldn't be a problem, right? Do you have a grinder that you can use? That should make the job much easier... __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

03-15-2004, 03:22 PM	#10
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	i think i do... but really.. i dont wana full with the whole thing. everytime i try to do somethin on my car i always fuck somethin up. i got quoted 35-40$ today from a shop here depending on how hard it is to put on. and i was like its a bolt on and hes like well they say that but it sometimes isnt the case... real jackass there. but anyhow. __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-15-2004, 03:25 PM	#11
B16DoHcCrx033003 4th Gear Join Date: Sep 2003 Location: New Castle, PA Age: 36 Posts: 621	gring off the bolt heads, and get some easy outs.. they work no matter what....

03-15-2004, 11:18 PM	#12
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Why don't you take it to a shop...and ask them to do it...and ask them to show you how to do it...say you really want to learn. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

03-16-2004, 01:30 PM	#13
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	http://www.4gcivichowto.0catch.com theres the site I made to show how "hard" it was to do my own catback. I basically took two days because I didn't plan ahead. I had the same problem you have with the cat being fused to the old pipe. I wasted so much time trying to hacksaw those bolts (If I had a dremel at the time, that might have done it), when I justed ended up taking it to my dads friend and he torched the bolts out. after that it was complete bolt up, easy as pie. Mine came with some hardware, although I had to buy a few extra gaskets and one bolt. oh and also, make sure you put the midpipe in RIGHT SIDE UP! for a week I couldn't figure out why it was scraping on every bump! just do it yourself, you'll feel great about it!

03-16-2004, 05:06 PM	#14
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	well i got it on wit hthe muffler shop.. i hated having to drive my car in all this snow shit. But i got it on. they charged me really cheap and it sounds very badass... thanks guys for ur help __________________ 2003 Apex Silver Mitsubishi Evolution 8

03-16-2004, 05:06 PM	#15
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	oh come on its so easy to get those bolts off. ive had to do it like 5-10 times, and again today. __________________ Doody Ej1 Yse.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode