.:HSTuners::

Jayberg00 · 11-02-2004, 05:36 AM

i got a b16 and now the 3rd gear crunches when i select it when the RPM is past 5000. every one keeps telling me that the b16 tranny syncros is soft and i should get a GSR tranny, but they usually go for about 700 and i can get the b16 tranny fix for 175 labor and i buy the parts. what i wanna know is can the GSR syncros fit on the b16 second and third gear, or is there syncros for the b16 that can take aggressive shifts.

*pdiggitydogg* · 11-02-2004, 08:35 AM

Its all honda trannies that have that little issue. b16's just tend to get more about it becuase people rev the snot out of them.

If you get new synchros again you'll be fine. Treat it nice.

beef'd sychros - http://www.gear-speed.com/detail_synchros.html#anchor

For now, you can use some GM synchromesh fluid as a bandaid.
Part # 12377916

*AzCivic* · 11-02-2004, 10:14 AM

I'm AzCivic, and I approve the above statement.

Jayberg00 · 11-07-2004, 05:34 AM

well I ordered the Carbon Coated Synchros
and they will install them in like two weeks. have any one ever welded their differentials before so both wells spin at the same time all the time, is this bad in any way cause i will be getting that done also. Any advise.

*AzCivic* · 11-07-2004, 05:44 AM

uhhh, you dont want to do that on a street car, in a turn you want the wheels to have the ability to spin at different speeds.

*pdiggitydogg* · 11-07-2004, 10:09 PM

and...Im PDiggityDogg, and I approve the above statement.

*AzCivic* · 11-08-2004, 02:34 AM

11-02-2004, 05:36 AM	#1
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 39 Posts: 83	b16 tranny i got a b16 and now the 3rd gear crunches when i select it when the RPM is past 5000. every one keeps telling me that the b16 tranny syncros is soft and i should get a GSR tranny, but they usually go for about 700 and i can get the b16 tranny fix for 175 labor and i buy the parts. what i wanna know is can the GSR syncros fit on the b16 second and third gear, or is there syncros for the b16 that can take aggressive shifts. __________________ "5 Speed Imports" The New Racers, Gear Up .

11-07-2004, 05:34 AM	#4
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 39 Posts: 83	well I ordered the Carbon Coated Synchros and they will install them in like two weeks. have any one ever welded their differentials before so both wells spin at the same time all the time, is this bad in any way cause i will be getting that done also. Any advise. __________________ "5 Speed Imports" The New Racers, Gear Up .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-02-2004, 08:35 AM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Its all honda trannies that have that little issue. b16's just tend to get more about it becuase people rev the snot out of them. If you get new synchros again you'll be fine. Treat it nice. beef'd sychros - http://www.gear-speed.com/detail_synchros.html#anchor For now, you can use some GM synchromesh fluid as a bandaid. Part # 12377916

11-02-2004, 10:14 AM	#3
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	I'm AzCivic, and I approve the above statement.

11-07-2004, 05:44 AM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	uhhh, you dont want to do that on a street car, in a turn you want the wheels to have the ability to spin at different speeds.

11-07-2004, 10:09 PM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	and...Im PDiggityDogg, and I approve the above statement.

11-08-2004, 02:34 AM	#7
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804