.:HSTuners::

romyrome2005 · 08-24-2006, 01:25 PM

Hi guys, how y'all doin? i have a very noob question, i'm new to the scene i have a stock 1995 honda civic ex ,D16Z6 engine, and i was wondering how can i make the engine stronger, you know occasional stoplight racing here and there...but im not redlining it...(it has approximately 150,000+) miles, so i was wondering what should i do with the motor to handle that kind of stress...
thanks

IALuder · 08-24-2006, 04:25 PM

rebuild it. clean it. no need to upgrade the head if it nots going to be a "track" car.

romyrome2005 · 08-24-2006, 06:06 PM

thanks for the reply, man. i'm new to the forum and i can see that you've been here for a long time now......are you racing on the track ? what do you think is the safest RPM in my D16?...man, i can see you have one of the best answers here so do you mind giving me tips on my engine?? lol...i just wanna run stock for now but i wanna make sure that my engine could take all the beating.....

romyrome2005 · 08-24-2006, 06:13 PM

oh an when you mean rebuild the engine you mean change the rod, piston, and rings? so its better to put aftermarket parts right? ....and for the cleaning part, no idea. bear with me, man..lol

AkimboStylee · 08-24-2006, 09:59 PM

I had a d16a6 motor in my hatch (stock with just an intake) andi was running it to redline and put close to 120,000 on it before failure(bought it with 110,0 and ran it until 230,000 miles on it) they are tough little motors

IALuder · 08-24-2006, 10:58 PM

i got a 110 on my 95 ex right now. its god i/h/e. i take it to redline and race it on stock head parts and internals. but then agian its not my track car. it more a DD.

rebuilding is pretty much make sure the internals and head work are still good. with the usuall wear and tear. you can replace them if you prefer with aftermarket OE stuff. like i siad no point in spending the money to build a beast of a car when your just DD it.

cleaning can be done at more machine shops. they sand beat it and polich the block and check for scratchs in the cylinder walls ect. to do this it cost a little over 200 bucks.

romyrome2005 · 08-25-2006, 12:24 AM

nice. okay, so i'll probably will have a shop perform a port and polish, so can i see a difference after i had this done? what will this do to my engine? ....i'm not planning to redline it so hopefully it can last longer....btw, how long can a d16z6 engine last anyway? you know, without redlining it?

IALuder · 08-25-2006, 12:45 AM

dude i had a civic put 260K on it before blowing up. the longtivity of the engine last in how the maintance is done. oil change every 3K, not beatin up, change the belts on time. ect. itll last as long as you want. it all comes down to you.

for the PNP, that its nessacary. just tell them to clean it. itll cost less. more work going into a port n polish. becuase they are making the ports bigger which isnt that good for a stock motor.

just disassemble it and make sure everything kosher. see what i mean. if something is beat up or woren out replace it. but honestly i dont see you need to do anything. just keep up on maintance.

romyrome2005 · 08-25-2006, 01:05 AM

nice! thanks a lot, man. btw i think my clutch is about to go out....when i press on the clutch, i can feel and hear it clicking.(its not smooth in other words)....plus, when im starting at first gear it kind shakes a lot when not given enough gas...ever experienced this with your ex?

-what kind of intake are you using on your ex? brand? how was it? i think i want to have hp and torque gain at the bottom end...just to be safe...lol

-i think you're the only one interested in answering my questions..lol

AkimboStylee · 08-25-2006, 01:41 AM

as for an intake, just go with an ebay special intake, and buy a k&n filter(conical)

IALuder · 08-25-2006, 03:22 AM

^agreed, it all intakes are maxuim of a small 2-4hp gian. i dont recommend CAI. they have a deal with sucking water into the engine bay and ruining a good running motor. IE my prelude. if you want to gain low end power free up exhuast as well. get header and exhuast. i recommend APexi WS2 Exhuast for the quite but yet good gians.

the intake in my EX is a akimoto RAI with aem filter.

clutch problems sucks. seeing how its a DD get buy a stage 1. itll engage smooth and a little quicker.

romyrome2005 · 08-25-2006, 11:02 AM

when you mean exhaust, you mean the whole system, right? i'm considering to buy just a magnaflow muffler,,,would that be enough to just buy the muffler or the whole system??? w/o the pipes, and stuff, would that be acceptable? oh i won't have it welded, just bolted,,,
-plus i don't want it to sound ricey...just deep and won't sound stock.....

IALuder · 08-25-2006, 04:08 PM

if you buyjust a muffler your hurting your car more then helping it. the axle back aka muffler will not do anything but make your car sound worse and annoying.

the WS2 from Apexi is more of a stock sounding exhuast, but yet it yeilds gains over stock. it increase the piping size for better air flow. plus its stianless steel so you dont have to worrie about rust! i also recommend getting a high flow cat from carsound.

fertooos · 04-12-2020, 04:37 PM

rebuild it. clean it. no need to upgrade the head if it nots going to be a "track" car.

TimmyHollins · 11-24-2020, 08:57 AM

A track car's a track car, no matter if it's new or refurbished. You just have to make do with the performance.

08-24-2006, 01:25 PM	#1
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	D16Z6 valvetrain upgrade Hi guys, how y'all doin? i have a very noob question, i'm new to the scene i have a stock 1995 honda civic ex ,D16Z6 engine, and i was wondering how can i make the engine stronger, you know occasional stoplight racing here and there...but im not redlining it...(it has approximately 150,000+) miles, so i was wondering what should i do with the motor to handle that kind of stress... thanks

08-24-2006, 04:25 PM	#2
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	rebuild it. clean it. no need to upgrade the head if it nots going to be a "track" car. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

08-24-2006, 09:59 PM	#5
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	I had a d16a6 motor in my hatch (stock with just an intake) andi was running it to redline and put close to 120,000 on it before failure(bought it with 110,0 and ran it until 230,000 miles on it) they are tough little motors __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

08-24-2006, 10:58 PM	#6
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	i got a 110 on my 95 ex right now. its god i/h/e. i take it to redline and race it on stock head parts and internals. but then agian its not my track car. it more a DD. rebuilding is pretty much make sure the internals and head work are still good. with the usuall wear and tear. you can replace them if you prefer with aftermarket OE stuff. like i siad no point in spending the money to build a beast of a car when your just DD it. cleaning can be done at more machine shops. they sand beat it and polich the block and check for scratchs in the cylinder walls ect. to do this it cost a little over 200 bucks. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

08-25-2006, 12:45 AM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	dude i had a civic put 260K on it before blowing up. the longtivity of the engine last in how the maintance is done. oil change every 3K, not beatin up, change the belts on time. ect. itll last as long as you want. it all comes down to you. for the PNP, that its nessacary. just tell them to clean it. itll cost less. more work going into a port n polish. becuase they are making the ports bigger which isnt that good for a stock motor. just disassemble it and make sure everything kosher. see what i mean. if something is beat up or woren out replace it. but honestly i dont see you need to do anything. just keep up on maintance. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

08-24-2006, 06:06 PM	#3
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	thanks for the reply, man. i'm new to the forum and i can see that you've been here for a long time now......are you racing on the track ? what do you think is the safest RPM in my D16?...man, i can see you have one of the best answers here so do you mind giving me tips on my engine?? lol...i just wanna run stock for now but i wanna make sure that my engine could take all the beating.....

08-24-2006, 06:13 PM	#4
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	oh an when you mean rebuild the engine you mean change the rod, piston, and rings? so its better to put aftermarket parts right? ....and for the cleaning part, no idea. bear with me, man..lol

08-25-2006, 12:24 AM	#7
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	nice. okay, so i'll probably will have a shop perform a port and polish, so can i see a difference after i had this done? what will this do to my engine? ....i'm not planning to redline it so hopefully it can last longer....btw, how long can a d16z6 engine last anyway? you know, without redlining it?

08-25-2006, 01:05 AM	#9
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	nice! thanks a lot, man. btw i think my clutch is about to go out....when i press on the clutch, i can feel and hear it clicking.(its not smooth in other words)....plus, when im starting at first gear it kind shakes a lot when not given enough gas...ever experienced this with your ex? -what kind of intake are you using on your ex? brand? how was it? i think i want to have hp and torque gain at the bottom end...just to be safe...lol -i think you're the only one interested in answering my questions..lol

08-25-2006, 01:41 AM	#10
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	as for an intake, just go with an ebay special intake, and buy a k&n filter(conical) __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

08-25-2006, 03:22 AM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	^agreed, it all intakes are maxuim of a small 2-4hp gian. i dont recommend CAI. they have a deal with sucking water into the engine bay and ruining a good running motor. IE my prelude. if you want to gain low end power free up exhuast as well. get header and exhuast. i recommend APexi WS2 Exhuast for the quite but yet good gians. the intake in my EX is a akimoto RAI with aem filter. clutch problems sucks. seeing how its a DD get buy a stage 1. itll engage smooth and a little quicker. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

08-25-2006, 11:02 AM	#12
romyrome2005 Registered User Join Date: Jul 2006 Posts: 6	when you mean exhaust, you mean the whole system, right? i'm considering to buy just a magnaflow muffler,,,would that be enough to just buy the muffler or the whole system??? w/o the pipes, and stuff, would that be acceptable? oh i won't have it welded, just bolted,,, -plus i don't want it to sound ricey...just deep and won't sound stock..... __________________ Whose Line is it anyway?

08-25-2006, 04:08 PM	#13
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	if you buyjust a muffler your hurting your car more then helping it. the axle back aka muffler will not do anything but make your car sound worse and annoying. the WS2 from Apexi is more of a stock sounding exhuast, but yet it yeilds gains over stock. it increase the piping size for better air flow. plus its stianless steel so you dont have to worrie about rust! i also recommend getting a high flow cat from carsound. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-12-2020, 04:37 PM	#14
fertooos Registered User Join Date: Mar 2020 Posts: 68	rebuild it. clean it. no need to upgrade the head if it nots going to be a "track" car.

11-24-2020, 08:57 AM	#15
TimmyHollins Registered User Join Date: Oct 2020 Location: Tampa, FL Age: 39 Posts: 194	A track car's a track car, no matter if it's new or refurbished. You just have to make do with the performance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode