.:HSTuners::

01-28-2002, 11:04 PM

pull the ecu fuse (15a) and the back up fuse (7.5a), wait 15 sec, reinstall the fuses, and your're done. if the MIL is gone, wait for like 5 min or so and dont step on the gas. after that, shut the engine off..this resets the memory of the ecu to maximize the mixture of gas and air. if MIL is still on, you might want to check the code it's throwing...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-28-2002, 11:04 PM	#4
SWIFT Posts: n/a	pull the ecu fuse (15a) and the back up fuse (7.5a), wait 15 sec, reinstall the fuses, and your're done. if the MIL is gone, wait for like 5 min or so and dont step on the gas. after that, shut the engine off..this resets the memory of the ecu to maximize the mixture of gas and air. if MIL is still on, you might want to check the code it's throwing...