.:HSTuners::

blind34_1 · 04-09-2004, 10:31 PM

is this for a sound system or what? ground wires are easy: you have one big wire going from your negative post to a good slab of (unpainted) metal on the chassis. (the motor should also have grounding to the chassis). Anything that you need to "ground out" you just bolt to the chassis. When you are talking about sound systems, you need to consider how much current you want to draw. that will determine the diameter of wire you'll need.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-09-2004, 10:31 PM	#4
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 41 Posts: 1,813	is this for a sound system or what? ground wires are easy: you have one big wire going from your negative post to a good slab of (unpainted) metal on the chassis. (the motor should also have grounding to the chassis). Anything that you need to "ground out" you just bolt to the chassis. When you are talking about sound systems, you need to consider how much current you want to draw. that will determine the diameter of wire you'll need.