.:HSTuners::

*AzCivic* · 01-30-2004, 12:47 AM

the difference in blocks is that the d16 is a stroked out d15, so basically just the crank/rod legnth, the rods of the d16a6 should also be stronger then the d15's. all pistons in d series engines will interchange, but the compression ratio will change.

this may help: http://nicotine.golden.net/D-Series/dseries.xls

wall thickness should be exactly the same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-30-2004, 12:47 AM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	the difference in blocks is that the d16 is a stroked out d15, so basically just the crank/rod legnth, the rods of the d16a6 should also be stronger then the d15's. all pistons in d series engines will interchange, but the compression ratio will change. this may help: http://nicotine.golden.net/D-Series/dseries.xls wall thickness should be exactly the same.