.:HSTuners::

*AzCivic* · 09-05-2003, 10:52 PM

if you wanna good increase in power for cheap do this:

pull the motor, have it overbored .25mm(giving you 75.5mm bore and upping your total displacement from 1590cc to 1611cc's) then get the ZC pistons that are 75.5mm(upping your compression from 9.2:1 to 12.1:1) put those in along with new bearings/pistons rings.

then upgrade you valvetrain and put in a aftermarket cam/cam gear and raise you rev limit to whatever the cam likes.

you'll be smoking b16 civics in no time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-05-2003, 10:52 PM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	if you wanna good increase in power for cheap do this: pull the motor, have it overbored .25mm(giving you 75.5mm bore and upping your total displacement from 1590cc to 1611cc's) then get the ZC pistons that are 75.5mm(upping your compression from 9.2:1 to 12.1:1) put those in along with new bearings/pistons rings. then upgrade you valvetrain and put in a aftermarket cam/cam gear and raise you rev limit to whatever the cam likes. you'll be smoking b16 civics in no time.