.:HSTuners::

nonovurbizniz · 08-06-2003, 10:16 PM

Yeah...

Did you do it yourself?

The trick is leaving all the bolts kinda loose and jiggling it back and forth to get it sitting right...

If you loosen the 4 bolts that hold it on (2 on each side...) there should be some wiggle room... a SMALL wiggle down there (by the bolts) can equal a big difference in where the front of the hood sits...

you should be able to get that thing all lined up looking stock...

08-06-2003, 10:16 PM	#9
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	Yeah... Did you do it yourself? The trick is leaving all the bolts kinda loose and jiggling it back and forth to get it sitting right... If you loosen the 4 bolts that hold it on (2 on each side...) there should be some wiggle room... a SMALL wiggle down there (by the bolts) can equal a big difference in where the front of the hood sits... you should be able to get that thing all lined up looking stock... __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode