alignment question
Everytime I turn sharp my rim hits my tie rod and creates a crunching sound. My rims are half an inch deeper than my last ones so that is what is causing me all this trouble. anyway, my question is, if I swapped tie rods from either side so that the bow in the rod faces towards my strut instead of outward will this be alignable? a buddy of mine says reversing the tie rod will affect the toe-in. I turned the wheel all way to see if the bow in the tie rod was their so it wouldn't hit the strut and this appeared to not be the case. i can't stand having to do 3 point turns just to get into a tight parking space
|