.:HSTuners::

2000Pimpinex · 04-12-2006, 11:50 AM

Trying to get the bolt off to due the H23 manual tensioner conversion and the thing won't come loose. Tried impacts, breaker bars, pipes on end of breaker bars. Nothing will work. I'm running outta options.

ebpda9 · 04-12-2006, 03:36 PM

are you sure you are turning it the right way ? when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis

2000Pimpinex · 04-13-2006, 06:11 AM

Yeah, if all 6 of us that tried are that dumb then I deserve it. I ordered a part off amazon yesterday that holds the crank pulley so hopefully that will do the trick. I'm tired of putting $10 in gas in my bronco a day to make it to work and back.

ebpda9 · 04-13-2006, 08:43 PM

lol, i didn't know you did not have the tool. i bought it too when i did my timing belt.

2000Pimpinex · 04-15-2006, 06:04 AM

I got the crankshaft pulley holder tool from amazon. Now Im just waiting for it to not be raining here so I can get the bolt out.

Oh yeah, picked up my parts from honda yesterday. This thing should be back on the road today after work. Well, hopefully!

1unoevo8 · 10-19-2020, 02:40 PM

are you sure you are turning it the right way ? when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis
__________________

diobulando · 11-17-2020, 10:40 PM

when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis

articlehot · 03-18-2021, 11:50 PM

There was once a blind man who had so fine a sense of touch that, when any animal was put into his hands, he could tell what it was merely by the feel of it. One day the cub of a wolf was put into his hands, and he was asked what it

themaxgood · 08-05-2021, 01:45 AM

he then shot a very last-spherical 76 on the carmel, ind., path on wednesday to finish in a tie for 2nd with a 4-over 220, 4returned of winner john marshall butler.i played super,” daly ii advised the indianapolis megastar. “it'd had been cool to win, however i still have time. just a couple horrific 3-putts each days, however apart from that i played incredible.

04-12-2006, 11:50 AM	#1
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	Timing Belt Tensioner Broke-Can't get Crankshaft Pulley Bolt Loose Trying to get the bolt off to due the H23 manual tensioner conversion and the thing won't come loose. Tried impacts, breaker bars, pipes on end of breaker bars. Nothing will work. I'm running outta options. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

04-13-2006, 06:11 AM	#3
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	Yeah, if all 6 of us that tried are that dumb then I deserve it. I ordered a part off amazon yesterday that holds the crank pulley so hopefully that will do the trick. I'm tired of putting $10 in gas in my bronco a day to make it to work and back. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

04-13-2006, 08:43 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	lol, i didn't know you did not have the tool. i bought it too when i did my timing belt. __________________

04-15-2006, 06:04 AM	#5
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	I got the crankshaft pulley holder tool from amazon. Now Im just waiting for it to not be raining here so I can get the bolt out. Oh yeah, picked up my parts from honda yesterday. This thing should be back on the road today after work. Well, hopefully! __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-12-2006, 03:36 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	are you sure you are turning it the right way ? when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis __________________

10-19-2020, 02:40 PM	#6
1unoevo8 Registered User Join Date: Oct 2020 Location: US, Los Angeles Posts: 17	are you sure you are turning it the right way ? when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis __________________

11-17-2020, 10:40 PM	#7
diobulando Registered User Join Date: Nov 2020 Posts: 2	when i did mine i used a 6ft breaker bar and the puley holder was resting on the chassis

03-18-2021, 11:50 PM	#8
articlehot Registered User Join Date: Mar 2021 Posts: 2	There was once a blind man who had so fine a sense of touch that, when any animal was put into his hands, he could tell what it was merely by the feel of it. One day the cub of a wolf was put into his hands, and he was asked what it

08-05-2021, 01:45 AM	#9
themaxgood Registered User Join Date: Aug 2021 Posts: 1	he then shot a very last-spherical 76 on the carmel, ind., path on wednesday to finish in a tie for 2nd with a 4-over 220, 4returned of winner john marshall butler.i played super,” daly ii advised the indianapolis megastar. “it'd had been cool to win, however i still have time. just a couple horrific 3-putts each days, however apart from that i played incredible.