.:HSTuners::

11-18-2003, 10:53 PM

I put a 19mm suspension technique sway bar on my civic, my car is lowered with H&R Race springs, with tokico blues. The bushing from the sway bar is making a lot of noise when i hit a bump, is that normal, or do i have to lubricated it?

drdingo21 · 11-19-2003, 10:35 AM

you should have lubricated it. That will take care of the noise.

Racing Rice · 12-10-2003, 09:30 AM

I didnt have to lubricate anything, but I didnt have a ST swaybar either. It never hurts anything to lube something thats for sure.

ebpda9 · 12-10-2003, 12:11 PM

i have an accord and i have a st sway bar and it doesn't make any noise at all.

12-10-2003, 06:45 PM

I lubed it up, and its fine now, Thanks for all the replies.

12-31-2003, 12:13 AM

If they were equiped w/ the Poly bushings , well my friend thats a by-product of it's longevity. The kit should have come w/ a small package of clear lubricant, looks like dieelectric compound.,but over time it will wash off with rain etc... and it will squeek! A quick but temporary fix, is jack it up (safely) and spray the bushings w/ WD-40 or PB Blaster, to include all, center caps and the end links. Also check to make sure the end links are assembled correctly and not shifted or over torqued so much they are tearing... Good luck.

11-18-2003, 10:53 PM	#1
AzNRac312 Posts: n/a	My sway bar is making a lot of noise I put a 19mm suspension technique sway bar on my civic, my car is lowered with H&R Race springs, with tokico blues. The bushing from the sway bar is making a lot of noise when i hit a bump, is that normal, or do i have to lubricated it?

12-10-2003, 09:30 AM	#3
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	I didnt have to lubricate anything, but I didnt have a ST swaybar either. It never hurts anything to lube something thats for sure. __________________ Racing Rice

12-10-2003, 12:11 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i have an accord and i have a st sway bar and it doesn't make any noise at all. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-19-2003, 10:35 AM	#2
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	you should have lubricated it. That will take care of the noise.

12-10-2003, 06:45 PM	#5
AzNRac312 Posts: n/a	I lubed it up, and its fine now, Thanks for all the replies.

12-31-2003, 12:13 AM	#6
Importrepairguy Posts: n/a	If they were equiped w/ the Poly bushings , well my friend thats a by-product of it's longevity. The kit should have come w/ a small package of clear lubricant, looks like dieelectric compound.,but over time it will wash off with rain etc... and it will squeek! A quick but temporary fix, is jack it up (safely) and spray the bushings w/ WD-40 or PB Blaster, to include all, center caps and the end links. Also check to make sure the end links are assembled correctly and not shifted or over torqued so much they are tearing... Good luck.