.:HSTuners::

revival · 04-01-2006, 03:06 PM

So? Is it worth saving money to build? I'm so in like with this car...

ebpda9 · 04-01-2006, 04:32 PM

i like it, but i like the da9's better

*pdiggitydogg* · 04-01-2006, 04:43 PM

Ive only ever seen it in person once, and its very very clean

thermal · 04-01-2006, 11:48 PM

There are a few JDM conversions local of me. One with an RHD as well. I ilke it a lot. The only thing that bugs me about doing it is the fact that I will have to cut the guts of the bumper just to fit my ideal size intercooler....

*pdiggitydogg* · 04-04-2006, 01:07 PM

oh the sacrifices one must make

dabouncerx24 · 04-04-2006, 03:16 PM

These conversions are all over the Bay Area...I don't care much for them...

IALuder · 04-04-2006, 04:54 PM

i like it, prolly cuase i dont see any up here in the midwest.

i dont know if its worth the money or not. i rather be fast then look good now. i realized spending money on looks is a waste.

thermal · 04-04-2006, 08:02 PM

I hear you. That conversion can cost over $3k with HID. Not to mention that paint job might be required........

revival · 04-04-2006, 08:37 PM

Ok, well if you haven't realized that I live in Toronto... There aren't many of those here (well none that are very noticeable).

Looks + speed = sexiness

So, looks first then engine work later when I figure out what I can/want to do. And also, if this is going to be an independent(meaning no bf financial support

) project then I really need to save money. The JDM Integra Type R has always been one of my attainable favourites.

IALuder · 04-04-2006, 11:42 PM

its all a matter of what you want and can do. only your opinion should matter.

i think it is sexie, but with my driving record (bad) not worth it.

MissJDM · 04-07-2006, 11:55 PM

So are you looking to fully covert it to JDM ITR by going all out with the front conversion, the RHD and the interior?

revival · 04-08-2006, 12:15 AM

Hmmm... I'd like to fully convert one, but that would really depend on how deep my pockets are. University next year will completely kill any savings I have (which is at the moment 0). But if I ever gather that kinda cash front end conversion is a must and the interior will probably follow but RHD... no. My left hand is not coordinated enought to use the shifter.

MissJDM · 04-08-2006, 01:15 AM

I can tell you from experience in modding my DB8 that it's expensive. The JDM DB8 interior was a lot more rare at the time than it is now, but it's still really hard to find quality shit. I mean, I went through 3 sets of rear seats until I found the good ones. I went through two sets of JDM door panels. The JDM center console is a bitch because the shift handle area doesn't mold in correctly. The RHD CF vents don't flush the way they should. JDM carpet was easy but you still have to mod the handle holes.

All in all, man, it's so worth it! I didn't get to do the B18C-R but I did do the b20vtec so my guess is your swap will be a lot cheaper and less stress.

I still have my front conversion if you wanna buy. :-)

Oh yeah, and I hope you're a patient girl or guy because you've also gotta find the plastic panels to match.

thermal · 04-08-2006, 02:15 AM

I need ITR door panels and center console

. Hook your Asian brotha' up Lyna

revival · 04-08-2006, 01:04 PM

Well MissJDM, I suppose I have some patience. But as for the funding of such a project... Err... donations anyone??

...By the way, I'm a girl.

silver · 04-12-2006, 07:07 PM

are you purchasing an integra and converting the whole thing to type r or are you purchasing a type r and just changing the front end and seats?

revival · 04-12-2006, 09:40 PM

Well that depends on how much money I have doesn't it? I really like this car and I was just asking if it's worth saving for.

silver · 04-13-2006, 10:45 AM

well if you're planning on straight up purchasing one that is jdm, make sure it's a 98+ spec, don't waste the time with the 96spec.

and in short, yes it is worth the time(if you have the money), but get a real one at least and then do a front end conversion, don't get an integra and try and convert it to a type r

Mischief · 04-13-2006, 12:20 PM

you can buy my inteagra

Renee Guillen · 07-28-2011, 10:37 PM

JDM Integra is a good choice. It's still an Acura/Honda car. Acura car models are good in details especially Acura OEM Parts both internal and external. Though Acura are more luxurious and sporty than Honda. But it's the same thing then. Both of them performs well. So i think its a good choice. Aside from it looks good physically but also the engine performs well and its fuel-efficient.

colyfelb · 10-09-2020, 09:11 AM

Was the OP able to build a JDM Integra Type R?

04-01-2006, 03:06 PM	#1
revival Registered User Join Date: Mar 2006 Location: Toronto, ON Age: 36 Posts: 73	What do you think of the JDM Integra Type R? So? Is it worth saving money to build? I'm so in like with this car... __________________ Official Wallpaper Thread! Revival of Frankenstein... Revival of the Civic Type R... You know what I'm talking about...

04-01-2006, 04:32 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i like it, but i like the da9's better __________________

04-01-2006, 11:48 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	There are a few JDM conversions local of me. One with an RHD as well. I ilke it a lot. The only thing that bugs me about doing it is the fact that I will have to cut the guts of the bumper just to fit my ideal size intercooler.... __________________ Project Teg Visit the Turbo Forum

04-04-2006, 04:54 PM	#7
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	i like it, prolly cuase i dont see any up here in the midwest. i dont know if its worth the money or not. i rather be fast then look good now. i realized spending money on looks is a waste. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-04-2006, 08:02 PM	#8
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I hear you. That conversion can cost over $3k with HID. Not to mention that paint job might be required........ __________________ Project Teg Visit the Turbo Forum

04-01-2006, 04:43 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Ive only ever seen it in person once, and its very very clean

04-04-2006, 01:07 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	oh the sacrifices one must make

04-04-2006, 03:16 PM	#6
dabouncerx24 Registered User Join Date: Jul 2004 Posts: 548	These conversions are all over the Bay Area...I don't care much for them...

04-04-2006, 08:37 PM	#9
revival Registered User Join Date: Mar 2006 Location: Toronto, ON Age: 36 Posts: 73	Ok, well if you haven't realized that I live in Toronto... There aren't many of those here (well none that are very noticeable). Looks + speed = sexiness So, looks first then engine work later when I figure out what I can/want to do. And also, if this is going to be an independent(meaning no bf financial support ) project then I really need to save money. The JDM Integra Type R has always been one of my attainable favourites. __________________ Official Wallpaper Thread! Revival of Frankenstein... Revival of the Civic Type R... You know what I'm talking about...

04-04-2006, 11:42 PM	#10
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	its all a matter of what you want and can do. only your opinion should matter. i think it is sexie, but with my driving record (bad) not worth it. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-07-2006, 11:55 PM	#11
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	So are you looking to fully covert it to JDM ITR by going all out with the front conversion, the RHD and the interior? __________________ you say it best when you say nothing at all

04-08-2006, 12:15 AM	#12
revival Registered User Join Date: Mar 2006 Location: Toronto, ON Age: 36 Posts: 73	Hmmm... I'd like to fully convert one, but that would really depend on how deep my pockets are. University next year will completely kill any savings I have (which is at the moment 0). But if I ever gather that kinda cash front end conversion is a must and the interior will probably follow but RHD... no. My left hand is not coordinated enought to use the shifter. __________________ Official Wallpaper Thread! Revival of Frankenstein... Revival of the Civic Type R... You know what I'm talking about...

04-08-2006, 01:15 AM	#13
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	I can tell you from experience in modding my DB8 that it's expensive. The JDM DB8 interior was a lot more rare at the time than it is now, but it's still really hard to find quality shit. I mean, I went through 3 sets of rear seats until I found the good ones. I went through two sets of JDM door panels. The JDM center console is a bitch because the shift handle area doesn't mold in correctly. The RHD CF vents don't flush the way they should. JDM carpet was easy but you still have to mod the handle holes. All in all, man, it's so worth it! I didn't get to do the B18C-R but I did do the b20vtec so my guess is your swap will be a lot cheaper and less stress. I still have my front conversion if you wanna buy. :-) Oh yeah, and I hope you're a patient girl or guy because you've also gotta find the plastic panels to match. __________________ you say it best when you say nothing at all

04-08-2006, 02:15 AM	#14
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I need ITR door panels and center console . Hook your Asian brotha' up Lyna __________________ Project Teg Visit the Turbo Forum

04-08-2006, 01:04 PM	#15
revival Registered User Join Date: Mar 2006 Location: Toronto, ON Age: 36 Posts: 73	Well MissJDM, I suppose I have some patience. But as for the funding of such a project... Err... donations anyone?? ...By the way, I'm a girl. __________________ Official Wallpaper Thread! Revival of Frankenstein... Revival of the Civic Type R... You know what I'm talking about...

04-12-2006, 07:07 PM	#16
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 43 Posts: 820	are you purchasing an integra and converting the whole thing to type r or are you purchasing a type r and just changing the front end and seats? __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

04-12-2006, 09:40 PM	#17
revival Registered User Join Date: Mar 2006 Location: Toronto, ON Age: 36 Posts: 73	Well that depends on how much money I have doesn't it? I really like this car and I was just asking if it's worth saving for. __________________ Official Wallpaper Thread! Revival of Frankenstein... Revival of the Civic Type R... You know what I'm talking about...

04-13-2006, 10:45 AM	#18
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 43 Posts: 820	well if you're planning on straight up purchasing one that is jdm, make sure it's a 98+ spec, don't waste the time with the 96spec. and in short, yes it is worth the time(if you have the money), but get a real one at least and then do a front end conversion, don't get an integra and try and convert it to a type r __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

07-28-2011, 10:37 PM	#20
Renee Guillen Registered User Join Date: Jul 2011 Posts: 1	JDM Integra is a good choice. It's still an Acura/Honda car. Acura car models are good in details especially Acura OEM Parts both internal and external. Though Acura are more luxurious and sporty than Honda. But it's the same thing then. Both of them performs well. So i think its a good choice. Aside from it looks good physically but also the engine performs well and its fuel-efficient.

10-09-2020, 09:11 AM	#21
colyfelb Registered User Join Date: Sep 2020 Posts: 34	Was the OP able to build a JDM Integra Type R?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode