.:HSTuners::

drdingo21 · 11-20-2002, 09:53 PM

Well we were driving around earier tonight, i was pulling out of this parking lot when my front bumper scraped a little bit, ok no big deal..
Now on to the problem at the next corner i used my left blinker and it was blinking fast, which means there is a porblem... so i get out and look and sure enough the front left blinker isn't blinking. so i went to walmart bought a replacment bulb. Got it in and still...the same thing. What would make it do this? the bulb lights up but doesn't blink.....any ideas?

11-20-2002, 09:56 PM

did you do anything with your light like did you put new one's in.

4jacks · 11-20-2002, 09:58 PM

you probably knocked your wiring loose somewhere

drdingo21 · 11-20-2002, 10:02 PM

yea, there is a new bulb in there...how could i know the wiring loose?

ShEaNy · 11-20-2002, 10:04 PM

just go underneath the front there and look for any loose wires around the bumper light...that should be the problem..

4jacks · 11-20-2002, 10:06 PM

get your self a voltmeter, take your front bumper off... and start playing with stuff

11-20-2002, 11:49 PM

I had the same problem one time man. What happened was that my socket that you put the bulb in went bad, and I don't know why. I had to replace it. What you need to do before checking any of that wiring stuff is to take off your front bumper, take the socket from the working side and replace the bad side socket with the good one and see if it works. If it does, then it is the socket. If it is the socket, then I know that the 92-95 model civics have the same socket that the 96-00 does. Hope that helps.

drdingo21 · 11-21-2002, 12:13 AM

how does the socket come off?

11-21-2002, 01:04 AM

Quote:

Originally posted by drdingo21
how does the socket come off?

There is like a little push button...you push and pull it...it is where the harness meets the socket.

94_AcCoRd_EX · 11-21-2002, 01:11 AM

Yup, sounds like wiring to me if you checked the bulb.

ebpda9 · 11-21-2002, 09:06 AM

i think it's just the socket messed up. they look so cheap and wimpy to me.

11-21-2002, 06:26 PM

Just a remark!
Remember NOT to touch the bulbs, some bulbs when touched the grease that u have in your hand would ruin it.

drdingo21 · 11-21-2002, 06:51 PM

not these, they are just normal bulbs... plus there is no way to get it out with out touching the bulb...it rained all day to day so i didn't get a chance to try it yet...

11-21-2002, 11:25 PM

Before you go ahead and replace the socket, take a small screwdriver and scrape the little copper connectors in the socket, re-install the bulb and check it again. It could also be you may have got a bad bulb, take one from somewhere else and see if it still doesn't work.

4jacks · 11-22-2002, 02:42 PM

get a dang on voltmeter,,... screw that take this apart take that apart .... just use the dang on volt meter

drdingo21 · 11-23-2002, 07:20 AM

alright fixed it. I took out the light and twisted the socket out of the light house and went to turn the blinker on so i could test it with me Volt meter, and it worked! the connector must have jarred lose when i laid the front of the car into the ground

11-23-2002, 05:38 PM

HA...I knew it was the socket!

4jacks · 11-23-2002, 06:07 PM

HA ! i knew it was the Volt Meter !

11-23-2002, 06:43 PM

Quote:

Originally posted by 4jacks
HA ! i knew it was the Volt Meter !

LOL..I thought that he said he "twisted the light socket", and was about to use the volt meter, but didnt' use it. lol

4jacks · 11-25-2002, 09:59 PM

Quote:

Originally posted by SilVtec
LOL..I thought that he said he "twisted the light socket", and was about to use the volt meter, but didnt' use it. lol

Too True.. But He HAD the VoltMeter, and the Magical Powers of the Voltmeter fixed it for him By just being there !

Ok that's a bit of a strecth

11-20-2002, 09:53 PM	#1
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	What would cause this? Well we were driving around earier tonight, i was pulling out of this parking lot when my front bumper scraped a little bit, ok no big deal.. Now on to the problem at the next corner i used my left blinker and it was blinking fast, which means there is a porblem... so i get out and look and sure enough the front left blinker isn't blinking. so i went to walmart bought a replacment bulb. Got it in and still...the same thing. What would make it do this? the bulb lights up but doesn't blink.....any ideas?

11-20-2002, 09:58 PM	#3
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 45 Posts: 1,129	you probably knocked your wiring loose somewhere __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

11-20-2002, 10:06 PM	#6
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 45 Posts: 1,129	get your self a voltmeter, take your front bumper off... and start playing with stuff __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

11-21-2002, 01:11 AM	#10
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Yup, sounds like wiring to me if you checked the bulb. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

11-21-2002, 09:06 AM	#11
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i think it's just the socket messed up. they look so cheap and wimpy to me. __________________

11-20-2002, 09:56 PM	#2
Injen Posts: n/a	did you do anything with your light like did you put new one's in.

11-20-2002, 10:02 PM	#4
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	yea, there is a new bulb in there...how could i know the wiring loose?

11-20-2002, 10:04 PM	#5
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 40 Posts: 3,821	just go underneath the front there and look for any loose wires around the bumper light...that should be the problem..

11-20-2002, 11:49 PM	#7
SilVtec Posts: n/a	I had the same problem one time man. What happened was that my socket that you put the bulb in went bad, and I don't know why. I had to replace it. What you need to do before checking any of that wiring stuff is to take off your front bumper, take the socket from the working side and replace the bad side socket with the good one and see if it works. If it does, then it is the socket. If it is the socket, then I know that the 92-95 model civics have the same socket that the 96-00 does. Hope that helps.

11-21-2002, 12:13 AM	#8
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	how does the socket come off?

11-21-2002, 06:26 PM	#12
Promo2000 Posts: n/a	Just a remark! Remember NOT to touch the bulbs, some bulbs when touched the grease that u have in your hand would ruin it.

11-21-2002, 06:51 PM	#13
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	not these, they are just normal bulbs... plus there is no way to get it out with out touching the bulb...it rained all day to day so i didn't get a chance to try it yet...

11-21-2002, 11:25 PM	#14
Almighty-Si Posts: n/a	Before you go ahead and replace the socket, take a small screwdriver and scrape the little copper connectors in the socket, re-install the bulb and check it again. It could also be you may have got a bad bulb, take one from somewhere else and see if it still doesn't work.

11-22-2002, 02:42 PM	#15
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 45 Posts: 1,129	get a dang on voltmeter,,... screw that take this apart take that apart .... just use the dang on volt meter __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

11-23-2002, 07:20 AM	#16
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	alright fixed it. I took out the light and twisted the socket out of the light house and went to turn the blinker on so i could test it with me Volt meter, and it worked! the connector must have jarred lose when i laid the front of the car into the ground

11-23-2002, 05:38 PM	#17
SilVtec Posts: n/a	HA...I knew it was the socket!

11-23-2002, 06:07 PM	#18
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 45 Posts: 1,129	HA ! i knew it was the Volt Meter ! __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode