.:HSTuners::

Mischief · 01-01-2005, 08:18 PM

Have any information on this? I have a 99 GS and was wondering if it's worth it to do? I can't see myself spending too much money on it just so I could have a manual car, because I could probably save money by selling my car and just buying a manual one.. But it'd just be alot less fuss (hopefully) to do a swap.. What parts would I need? How much? and how much would labor cost? Was hoping someone on here has done this before

thermal · 01-01-2005, 09:16 PM

It's not really that hard to do it. It just takes time. Contrary to popular belief, if you look under where the pedals are supposed to be, you'll notice that the mounting slots/holes are already there. You just have to mount the actual pedals. The mounts and firewall penetration holes are also already there.

So you'll need these:
-clutch pedal
-brake pedal (the auto ones are too wide)
-manual tranny with VSS sensor
-passenger side tranny mount
-passenger side torque mount
-starter
-axles
-hydraulic tubing assemly
-slave cylinder
-shift linkage
-shifter
-center console
-clutch switch
-ECU

^the list is just the minimum. I'm sure I'm missing something else. Obviously you'll need other small stuff like nuts and bolts. The best thing to do is visit your local junkyard and acquire as much parts as you can from the same year Teg or 2nd gen. My friend and I did one on an EK (EJ6 actually). It was pretty easy since the parts from 92-00 civics are pretty much all over the place where I'm at. I think you can use some parts from a civic also, but I'm not too sure about that. Goodluck man......

Mischief · 01-01-2005, 09:30 PM

Alright thanks for the info Thermal

Now just to wait out winter so I can go down to the junk yard. Or find someone parting out their 'teggy

thermal · 01-01-2005, 09:34 PM

where out in Maine you from?

Mischief · 01-01-2005, 09:40 PM

Biddeford.. About half a hour south of Portland

thermal · 01-02-2005, 07:02 AM

I see, my girl is from Elsworth. I plan to visit there sometime this summer....

JDMFantasy2k · 01-02-2005, 10:44 AM

that's one hell of an LDR. Make sure you pay me a visit in CT, hopefully by then i'll be boosted lol

MissJDM · 01-02-2005, 01:42 PM

While you're visiting everyone, stop by[er, drive cross country] and say Hi and I'll make you some adobo, Therm.

I always figured it was convenient to buy a manual vehicle rather than doing the swap..unless you have heavily tuned your ride.

Mischief · 01-02-2005, 06:58 PM

Bring your Integra and let me drive it while you're up here and you can stay for free at my house

ebpda9 · 01-02-2005, 08:07 PM

well i think it's harder and harder to come by manual cars lately. whoever has them will hang on to them, so the only solution is to do an automatic to manual swap. i could never find a 5 spd accord in cleveland for sale, but they are all over the junkyards. same goes with my integra

MissJDM · 01-03-2005, 03:03 AM

Once again, geographic, geographic, geographic!

Oh, and supply and demand.

mavaaoife · 01-03-2005, 07:05 AM

Manual cars here in Ga come out the behind.. I shoulda got one when I got my civic in July.. but because of my messed up pelvis I didnt and now I highly regret it. I thought about doing a swap but since I am looking to get a supra.. I figured Ill leave the civic auto like it is.

C's 94 InTeGrA · 01-03-2005, 10:46 PM

Yea all the local places here have only auto tegs which sucks. But one of my buddys gets any kind of honda parts like its his job. he did have a could bseries sitting around his garage and sold them in like 2 days

thermal · 01-04-2005, 01:16 AM

I'll stop by if I ever have time. I wont be driving the Teg tho. It'll be my other daily driven 94 Accord LX Wagon

Adobo rocks!

01-01-2005, 08:18 PM	#1
Mischief Registered User Join Date: Dec 2004 Location: Maine Age: 37 Posts: 2,052	AT to MT? Have any information on this? I have a 99 GS and was wondering if it's worth it to do? I can't see myself spending too much money on it just so I could have a manual car, because I could probably save money by selling my car and just buying a manual one.. But it'd just be alot less fuss (hopefully) to do a swap.. What parts would I need? How much? and how much would labor cost? Was hoping someone on here has done this before

01-01-2005, 09:16 PM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	It's not really that hard to do it. It just takes time. Contrary to popular belief, if you look under where the pedals are supposed to be, you'll notice that the mounting slots/holes are already there. You just have to mount the actual pedals. The mounts and firewall penetration holes are also already there. So you'll need these: -clutch pedal -brake pedal (the auto ones are too wide) -manual tranny with VSS sensor -passenger side tranny mount -passenger side torque mount -starter -axles -hydraulic tubing assemly -slave cylinder -shift linkage -shifter -center console -clutch switch -ECU ^the list is just the minimum. I'm sure I'm missing something else. Obviously you'll need other small stuff like nuts and bolts. The best thing to do is visit your local junkyard and acquire as much parts as you can from the same year Teg or 2nd gen. My friend and I did one on an EK (EJ6 actually). It was pretty easy since the parts from 92-00 civics are pretty much all over the place where I'm at. I think you can use some parts from a civic also, but I'm not too sure about that. Goodluck man...... __________________ Project Teg Visit the Turbo Forum

01-01-2005, 09:34 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	where out in Maine you from? __________________ Project Teg Visit the Turbo Forum

01-02-2005, 07:02 AM	#6
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I see, my girl is from Elsworth. I plan to visit there sometime this summer.... __________________ Project Teg Visit the Turbo Forum

01-02-2005, 10:44 AM	#7
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	that's one hell of an LDR. Make sure you pay me a visit in CT, hopefully by then i'll be boosted lol __________________

01-02-2005, 01:42 PM	#8
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	While you're visiting everyone, stop by[er, drive cross country] and say Hi and I'll make you some adobo, Therm. I always figured it was convenient to buy a manual vehicle rather than doing the swap..unless you have heavily tuned your ride. __________________ you say it best when you say nothing at all

01-02-2005, 08:07 PM	#10
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	well i think it's harder and harder to come by manual cars lately. whoever has them will hang on to them, so the only solution is to do an automatic to manual swap. i could never find a 5 spd accord in cleveland for sale, but they are all over the junkyards. same goes with my integra __________________

01-03-2005, 03:03 AM	#11
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Once again, geographic, geographic, geographic! Oh, and supply and demand. __________________ you say it best when you say nothing at all

01-03-2005, 07:05 AM	#12
mavaaoife Registered User Join Date: Aug 2004 Location: Atlanta, Ga. Age: 40 Posts: 1,486	Manual cars here in Ga come out the behind.. I shoulda got one when I got my civic in July.. but because of my messed up pelvis I didnt and now I highly regret it. I thought about doing a swap but since I am looking to get a supra.. I figured Ill leave the civic auto like it is. __________________ 1994 Supra TT Auto-THE WORLDS MOST CURSED SUPRA!!! www.atlsupras.com Http://www.myspace.com/tehren84

01-03-2005, 10:46 PM	#13
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	Yea all the local places here have only auto tegs which sucks. But one of my buddys gets any kind of honda parts like its his job. he did have a could bseries sitting around his garage and sold them in like 2 days __________________ 2003 Apex Silver Mitsubishi Evolution 8

01-04-2005, 01:16 AM	#14
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I'll stop by if I ever have time. I wont be driving the Teg tho. It'll be my other daily driven 94 Accord LX Wagon Adobo rocks! __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode